Noble House 17780 Operating instructions

Brand
Noble House
Model
17780
Type
Operating instructions
No. Picture Description Qty
A
Backrest Panel 1
B
Chair Seat Panel 1
C
Right Legs with Arm and Pre-
attached Bolts for Seat Panel
and Leveller
1
D
Left Legs with Arm and Pre-
attached Bolts for Seat Panel
and Leveller
1
CAUTION : This chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
Assembly Instructions
Caution : You must read this before you proceed.
ARCH MESH CHAIR
1 OF 4
No. Picture Description Qty
Washer (8mm) 8
Spring Washer (8mm) 8
Nut (8mm) 8
J
Rubber Cap 4
G
Spanner 1
Step 1
E
Place the Chair Seat Panel(B) into the pre-attached bolts of the Left Legs(D)Panel
using Washers, Spring Washers and Nuts(E, with Spanner(G).
DO NOT overtighten at this stage.
Before Beginning Assembly:
2 OF 4
Stand the chair upright.
Adjust the Pre-attached Levellers on the Chair Legs until the chair is level with the ground.
Now, in a sequential manner, fully and securely tighten all screws and bolts at all
joints. Then Add Rubber Caps(J) on all bolt ends to protect skin or clothing from
getting snagged.
Your Chair is ready for use.
Step 3
Repeat the same assembly process for the RIGHT leg.
DO NOT overtighten at this stage.
Step 4
Step 2
Then attach the Backrest Panel(A) to the to Left Legs(D) Backrest Panel using
Washers, Spring Washers and Bolts(E), with Spanner(G).
DO NOT overtighten at this stage.
3 OF 4
4 OF 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Noble House 17780 Operating instructions

Brand
Noble House
Model
17780
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents