Atlas Metal Industries CAGP-2 Datasheet

Brand
Atlas Metal Industries
Model
CAGP-2
Category
Multimedia carts & stands
Type
Datasheet

Atlas Metal Industries CAGP-2 is the perfect solution for increasing impulse sales by carving meat right in the serving line. It comes complete with an au jus pan and a perforated stainless stop with meat prongs, so you can get started right away. The positive self-locking device keeps the tops level and the equipment in place, while the fully mobile design with 5" diameter swivel casters (two with brakes) makes it easy to move around. The CAGP-2 is NSF certified and the hot food well is UL recognized, so you can be sure it's safe and reliable.

Atlas Metal Industries CAGP-2 is the perfect solution for increasing impulse sales by carving meat right in the serving line. It comes complete with an au jus pan and a perforated stainless stop with meat prongs, so you can get started right away. The positive self-locking device keeps the tops level and the equipment in place, while the fully mobile design with 5" diameter swivel casters (two with brakes) makes it easy to move around. The CAGP-2 is NSF certified and the hot food well is UL recognized, so you can be sure it's safe and reliable.

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
MODULAR SERVING SYSTEMS
ALUMINUM - CA
CARVING UNIT
Item No.
Quantity
CAGP-2
CA-37
DESCRIPTION:
Sell the sizzle! Nothing increases impulse sales
more than carving a steamship round, roast
turkey or ham right in the serving line. The carv-
ing cart can install anywhere in your serving line,
everything is included, gravy pan and perforated
carving plate. It’s fully assembled and pre-wired -
just plug it in and turn it on.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units togeth-
er; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition. It’s the right cart for your serving line
needs.
FEATURES:
Comes complete with au-jus pan, and
perforated stainless stop with meat prongs
Positive self-locking device - keeps tops level
and equipment in place
Fully mobile - each unit is provided with 5” dia.
swivel casters, two with brakes
NSF certified, hot food well is UL recognized -
CAGP-2 SHOWN
Shown with accessories,
Undershelf, End Panels
HLA-Heat Lamp
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CARVING UNIT
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded,
ground and polished. An integral locking device shall be provided to align
and retain cart positioning when two or more carts are joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 1-
1/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with front panel of plastic laminate on
.050 aluminum. Owner to specify finish.
CARVING UNIT: The cart is complete and includes a WHGP-2 drop-in hot
unit installed in the top. Constructed of 18 gauge, type 304 stainless steel,
with raised perimeter bead and solid vinyl gasket. The inner liner is one
piece construction, all welded, ground and polished to a uniform finish. All
corners are coved with a minimum 1/4” radius. A 3/4” dia. drain with strain-
er, brass nipple, and valve is provided. The pan is fully insulated with high
density fiberglass insulation, 1” thick on all sides, 2” thick on the bottom, and
enclosed by a 22 gauge galvanized steel outer liner.
PERFORATED ADAPTER: The liner is fitted with a perforated adapter plate
with four-prong meat holder and ladle opening. Directly beneath the adapter
plate is a sloped gravy pan. The adapter and pan are removable for cleaning.
ELECTRICAL: The unit is provided with two (2 ea.) 850 watt heating elements,
pre-wired to a single thermostat control, with a pilot light. One (1 ea.) 6’ long,
3-wire cord and plug are provided (NEMA 5-15P.)
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel
type with ball bearings, in both swivel and axle raceways, and provided with
grease fittings. Both casters on operator’s side have toe activated brakes.
Specifications subject to change without notice.
SPECIFICATIONS:
ACCESSORIES:
HLA - Heat lamp
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
SG - Plexiglass sneeze guard
S - Stainless steel front panel
EP - End panel,
plastic laminate /
stainless steel
RP - Fixed rear panel
RPS - Rear sliding doors
US - Stainless steel undershelf, removable
Front skirt with recessed casters
End skirt
Rear skirt
CSG - Food guard
PRV - Vertical protector case
CA-38
MODEL PAN SIZE
ELECTRICAL CHARACTERISTICS
HOT FOOD WELL
SHIP WT.
(lbs.)
CAGP-2 19-7/8” X 25-1/2 X 6” 14.2 amps. - 1.7 KW - 120 V 225
10/08-SC
30 1/2”
Plan View Rear Elevation End View
8 1/2”
35”
36 1/4”
  • Page 1 1
  • Page 2 2

Atlas Metal Industries CAGP-2 Datasheet

Brand
Atlas Metal Industries
Model
CAGP-2
Category
Multimedia carts & stands
Type
Datasheet

Atlas Metal Industries CAGP-2 is the perfect solution for increasing impulse sales by carving meat right in the serving line. It comes complete with an au jus pan and a perforated stainless stop with meat prongs, so you can get started right away. The positive self-locking device keeps the tops level and the equipment in place, while the fully mobile design with 5" diameter swivel casters (two with brakes) makes it easy to move around. The CAGP-2 is NSF certified and the hot food well is UL recognized, so you can be sure it's safe and reliable.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents