Atlas Metal Industries BL-CU-O Datasheet

Brand
Atlas Metal Industries
Model
BL-CU-O
Type
Datasheet

This manual is also suitable for

a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
MODU LA R S ERV I N G S Y S T E M S
BL-27
MOBILE
CORNER UNIT
FEATURES
Attractive plastic laminate panels
Stainless steel tray slide (non-folding on BL-CU-O only)
Economical cost
Cam-Lock system
DESCRIPTION
Eliminates wasted space. Creates useable customer serving areas -
keeps the line flowing and provides an opportunity for more food
display - higher sales.
A wide range of attractive plastic laminate colors is available, or ure-
thane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete
reliability - use as an individual unit or joined in a continuous serv-
ing line with our exclusive “Cam-Lock” system.
BL-CU-O
BL-CU-I
Quantity Item No.
MODEL #BL-CU-I
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-28
TOP: Constructed of 16 gauge, type 304 stainless
steel, die-formed, welded, ground and polished
to a uniform finish with rolled front edge.
BODY: Frame construction shall be of hi-tensile
s q u a re aluminum tubing, 1-1/4”, 1” and 3”
extruded, vertical radius corners. Frame sec-
tions are all welded construction, ground and
polished to a uniform finish. Body is complete
with front panel, end panels and 8-5/8” rear
a p r on of plastic laminate on .050 aluminum.
Owner to specify laminate finish. Cam-lock lock-
ing system included with each unit to align and
retain cart positioning, when two or more units
are joined.
TRAY SLIDE: Constructed of 16 gauge, type 304
stainless steel, welded, ground and polished,
with die-formed raised ribs for ease of sliding
trays. The tray slide has welded corners and
re i n f o rced sections where necessary, and is
NON-FOLDING (BL-CU-0 only).
CASTERS: N.S.F approved, 5” diameter, non-
marking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
Stainless Steel Legs with adjustable feet, in
lieu of casters
Urethane painted panels (see color chart)
SPECIFICATIONS:
BL-CU-O
BL-CU-I
MOBILE CORNER UNIT
10/04-SC
  • Page 1 1
  • Page 2 2

Atlas Metal Industries BL-CU-O Datasheet

Brand
Atlas Metal Industries
Model
BL-CU-O
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers