Cadco SG-1 User manual

Category
Multimedia carts & stands
Type
User manual

This manual is also suitable for

SGJ-2 Sneeze Guard for CBC-HH Series MobileServ
®
Junior Carts
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
For these models, UNSCREW AND REMOVE the Pan Holder Locking Knobs on Top Cart Surface
before attaching Sneeze Guard.
Line up the holes in the Sneeze Guard legs with the holes for the far left and far right
Pan Holder Locking Knobs on Cart Top Surface.
Then replace and LOOSELY screw the Pan Holder Locking Knobs,
leaving space to slide Pan Holder Keyhole Slots under the Pan Holder Locking Knob heads.
Position Panholders over the Pan Holder Locking Knobs and slide into place. Securely tighten Pan Holder Knobs.
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Back of Cart
Front of Cart
Sneeze Guard
Model SG-1 - for 3-Bay/ 6 Pan MobileServ
®
Cart Models
Model SG-4 - for 4-Bay/ 8 Pan MobileServ
®
Cart Models
Model SGJ-2 - for 2-Bay/ 4 Pan CBC-HH Series MobileServ
®
Junior Cart Models
Cadco,
Ltd.
200 International Way, Winsted, CT 06098
860-738-2500
l Fax 860-738-9772
l Website: www.cadco-ltd.com
Sneeze Guards for MobileServ
®
Carts
ASSEMBLY INSTRUCTIONS
SG-1 SG-4 SGJ-2
NOTE: For all carts, foods must be pre-heated or pre-chilled (as applicable) to serving temperature
before placing in pans in the cart.
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Back of Cart
(3-Bay / 6 Pan model shown)
Front of Cart
Cart Top Surface
Pan Holder
Locking Knobs
Front of Sneeze Guard
Left Keyhole Slot
for all non
CBC-HC models
Left Keyhole Slot for CBC-HC models only
SG-1/ SG-4 Sneeze Guards for 3 & 4 Bay MobileServ
®
Carts
(for attaching to CBC-HC Series Carts with Cambro
®
Camchiller, see next section)
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
SG-1 Sneeze Guard for CBC-HC Series MobileServ
®
Carts with Camchiller
®
only
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Front of Cart
Cart Top Surface
Front of Sneeze Guard
Left Keyhole Slot
for all non
CBC-HC models
Left Keyhole Slot for CBC-HC models only
Pan Holder
Locking Knobs
(*Cold Bay on
CBC-HC
models only)
Back of Cart
(CBC-HC 3-Bay / 6 Pan model shown)
For these models, LOOSEN BUT DO NOT REMOVE the Pan Holder Locking Knobs on Cart Top Surface
before attaching Sneeze Guard. Position the Keyhole Slots on the Sneeze Guard over the Pan Holder Locking Knobs,
slide the Sneeze Guard into place, repeat with all Panholders, and then tighten all Pan Holder Locking Knobs.
Right Keyhole Slot
for all models
Right Keyhole Slot
for all models
For these models, LOOSEN BUT DO NOT REMOVE the Pan Holder Locking Knobs on Cart Top Surface
before attaching Sneeze Guard. Position the Keyhole Slots on the Sneeze Guard
over the Pan Holder Locking Knobs on the Cart Top Surface, slide the Sneeze Guard into place,
repeat with all Panholders, and then tighten all Pan Holder Locking Knobs.
Place pre-frozen Camchiller
®
in bottom of Cold Bay Pan Holder when ready to use. Then position pans in the Pan Holders.
  • Page 1 1
  • Page 2 2

Cadco SG-1 User manual

Category
Multimedia carts & stands
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI