a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DROP-IN SERVING EQUIPMENT
ADAPTER PLATES
Item No.
Quantity
AD-Series
DESCRIPTION:
To maximize the efficiency of any operation,
Set-N-Serve offers a full line of adapter plates to
fit any 12” x 20” opening. When used with a hot
food well, a standard well can be used to hold
round inserts for soup, sauces, or gravy. A per-
forated adapter plate is available to keep prod-
uct moist or plain adapter to utilize a well as a
flat work surface. Adapters are available for cold
pans also, to hold salad bowls or dressing
inserts.
All adapter plates are constructed of rugged
stainless steel. A beaded edge prevents prod-
ucts from spilling to the pan below.
FEATURES:
All stainless steel construction
Full perimeter beaded edge
Fits any standard 12” x 20” opening
Wide variety of sizes - will accommodate
most standard round inserts
NSF certified
SS-29
ADGP SHOWN
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
SS-30
ADAPTER PLATE: Constructed of 18 gauge, type
304 stainless steel. A raised perimeter bead is die
stamped into each plate to prevent spillage to the pan
below.
SPECIFICATIONS:
Cut-out(s) are provided to exact size and location, as
shown on the drawing.
Specifications subject to change without notice.
ADAPTER PLATES
10/07-SC
21”
1
3”
AD-Plain
AD-Perforated
A
D-2610
6
1/2”
10 1/2”
8 1/2”
5
”
6
1/2”
A
D-28
A
D-36
A
D-35
6 1/2”
5”
6 1/2”
5 1/8”
AD-365
AD-65-P
AD-18B-P
16”
18 1/2”
AD-21B-P
/
