OMCONNECT K12 User manual

Type
User manual

OMCONNECT K12 is a smart keybox with a variety of features that make it a convenient and secure way to store and access your keys. With its Bluetooth connectivity, you can easily unlock the keybox using your smartphone or by entering a PIN code on the built-in keypad. You can also set temporary PIN codes for guests or delivery personnel, and receive notifications whenever the keybox is opened. The keybox is also equipped with a USB-C port that allows you to jump-start it if the batteries run out.

OMCONNECT K12 is a smart keybox with a variety of features that make it a convenient and secure way to store and access your keys. With its Bluetooth connectivity, you can easily unlock the keybox using your smartphone or by entering a PIN code on the built-in keypad. You can also set temporary PIN codes for guests or delivery personnel, and receive notifications whenever the keybox is opened. The keybox is also equipped with a USB-C port that allows you to jump-start it if the batteries run out.

USER MANUAL
K12
www.omconnect.com
V3.0
01/16
What’s Included
1 x KeyBox
0
1
2
3
45
6
7
8
9HELLO
2 x Mounting Screws
2 x Screws Anchors
2 x Screw Cap
1 x Reset Tool
1 x HELLO Card
Screw Driver x 1
01/16
02/16
Specification
Model
Unlock Mechanism
Battery
Material
K12
Body Zinc Alloy, SUS304
4 x AAA Alkaline Battery
Bluetooth, PIN Code, App
Front Inside Back
Jump Start USB-C
01/7-4 mm021
120mm ( 4- 7/10‘’ 120mm ( 4- 7/10‘’ 22mm ( 4/5 ‘’ )
0
1
2
3
45
6
7
8
9
01/7-4 mm021
Depth
Lock&Unlock
Emergency
Battery
Mobile Control
03/16
Administrator Unlock
.......
Anti-peeping Auto Locking
User Unlock
Add up to 10 digits before and after PIN code to
intensify your PINs.
This KeyBox allows to add up to 100 user PIN
codes for your family, friends and visitors.
If there are no opening motions in 10 seconds
the box will be automatically locked.
Bluetooth one-touch unlock Offline Unlock
Mobile Administrator
With your Mobile you could unlock the KeyBox by
tapping the ” ” on the App. You could generate offline code through
mobile App, for scheduled access, parcel
delivery, housekeeping, etc.
Set Administrator PIN Codes from your Mobile to
unlock, add users, delete users, etc.
Battery Life
4 AAA batteries, the life cycle will be more
than 12 months, please use good batteries.
Low Battery
When the battery runs out of power, system
will remind you to replace the batteries.
When the power is down and use USB-C to
jump start the lock and get it unlocked
Jump Start
Set a Master Administrator PIN for Unlocking,
settings, operations etc. and only the administrator
could change the administrator PIN code.
System Lockdown
The lock will be lockdown for 5 minutes
if continuously enter wrong PINs for 5 times.
A A A
A A A
A A A
A A A
Low Consumption
BLE broadcasting turns to sleep mode if no
operations.
Features
03/16
04/16
Quick Start
Step 1>Install Battery
>. Remove the (4) screws on the battery cover
>. Put 4 AAA batteries into the battery dock.
A A A
A A A
A A A
A A A
05/16
Step 3>Add Device
>1. Scan QR Code below and download the App and turn on your mobile Bluetooth
>1.Go to App Home page, click Add Device or click “+” on the upper right.
Step 2>Download Mobile App
05/16
06/16
> 2. Press +9+ and enter Admin password + , when the light slowly blinks in blue
the KeyBox is ready to pair.
07/16
>3. You will see the detected device and click “Go to add”.
07/16
>4. Connecting, you need to wait for few seconds to let it finish.
>5. Device added
08/16
Step 4>Change Admin Password-Initial Admin Password:123456
>1. Press and hold for 3 beeps
>2. Right after the 3 beeps please key in:
08/16
09/16
1
0
2
3
45
6
7
8
9
Enter
Initial Admin Password + +new admin password+ +new admin password+
Mechanical Instructions
Password & Factory Mode:
Bluetooth broadcasting & re-connecting:
Press any key to activate the Bluetooth, App&Device will get reconnected each other.
Bluetooth broadcasting will turn to sleep mode if no operations within 1 minute.
09/16
10/16
2. Add User Password
3. Delete User Password
Press + 0 + until the blue light blinks
>. Enter admin password +
>. Enter new user password +
>. Enter new user password again and press
>. When the (Enter button) blinks in green, user password has been set.
7. Reset Factory Mode
Press and hold the reset button for 5 seconds and with a long beep
5. Virtual digits-Anti Peeping
Add any digits before and after the correct password the KeyBox unlock as always
6. System Lockdown
KeyBox will Lockdown for 5 minutes if entering wrong password continuously 5 times
Password must be 6 digits (no more no less)
1. Password Length
Press + 2 + until the blue light blinks
>. Enter admin password and press
>. Enter the user password you wish to delete and press
>. Enter the user password again and press
>. When the (Enter button) blinks in green the password has been deleted.
4. Delete All User Password
Press + 00000 + until the blue light blinks
>. Enter admin password and press
>. When the (Enter button) blinks in green all passwords have been deleted.
App Instructions
You will see all devices and rooms on the home page.
Tap the Device to start operating.
Tap “Me” at the bottom to manage your home.
Touch the lock sign to unlock and lock.
Tap “Bell” sign to check the alarm records.
Tap “Member Management to add or delete members.
Tap “opening record” to check opening logs.
Tap “Intelligent Linkage” to turn on and off go home mode.
Tap “Set” to manage passwords
11/16
10/16
Tap “Get dynamic code” to get a code.
Tap “copy code” and send it to friend or family.
Tap “Pen” sign to edit your personal information.
11/16
12/16
Go to “Members” to add family or other members
Tap “+” to add family member or other members
12/16
Tap “ Add it now” under Family to add family members.
13/16
Owner need to complete the Home information before
adding any family member if required
The member need to be registered to the App before
adding as a family member
Fill up member information and set the role of the member
Tap “Save” to complete and the member will be able to
operate the device on his App
14/16
Go to “Opening Logs” to check the unlocking history
Tap the green bar to turn on “Family go home”function.
Tap the orange bar to turn on “Door lock alarm”function
You will get notification if user unlocked with Bluetooth
Go to “me” homepage and got to message center to
check the records.
15/16
With this feture you will be able to find out when and who
unlocked the KeyBox
Go to “Intelligent Linkage” to set more smart functions
Tap “password management” to add or remove codes.
Tap “Temporary code” to manage online and offline codes.
Tap “one-time code” under Online Code to
set an online one time code.
Tap “periodic Code” under Online Code to set a online
code which will be available in a period of time.
Tap ”One-Time Code” under Offline Code to generate a
one time offline code which will be a 10 digits code and
use it when the device is offline.
Tap “Offline Temporary Code” under Offline Code t
generate an offline code (10 digits) which will be available in
a period of time, and use when the device is offline or
Bluetooth disconnected with device.
Tap “Clear Code” to generate a code (10 digits) which is able
to clear Codes that need to be invalid or clear all codes.
15/16
16/16
Please note if the code less than 10 digits you need to
regenerate a new code, the code must be 10 digits.
13
16/16
13
Designed in France Made in China
OMCONNECT
Copyright © 2021 OMFOCUS TECH. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

OMCONNECT K12 User manual

Type
User manual

OMCONNECT K12 is a smart keybox with a variety of features that make it a convenient and secure way to store and access your keys. With its Bluetooth connectivity, you can easily unlock the keybox using your smartphone or by entering a PIN code on the built-in keypad. You can also set temporary PIN codes for guests or delivery personnel, and receive notifications whenever the keybox is opened. The keybox is also equipped with a USB-C port that allows you to jump-start it if the batteries run out.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI