2. Fishbone Offroad
  3. FB22135

Fishbone Offroad FB22135 Installation guide

  • Hello! I have reviewed the installation instructions for the Fishbone Offroad JK Rear Bumper Delete. This document details the steps for removing the stock bumper and installing the delete using existing hardware. It also mentions optional D-Ring Frame Mounts. I'm ready to answer any questions you might have about the installation or the product itself.
  • What tools are required for installation?
    What is included in the kit?
    Is the original hardware reused?
FB22135
Jeep® ’07-’18 JK Wrangler
JK Rear Bumper Delete
REQUIRED TOOLS
16mm Socket
18mm Socket
KIT CONTAINS
Rear Bumper Delete QTY
1
FB22135
Jeep® ’07-’18 JK Wrangler
JK Rear Bumper Delete
1
1) REMOVE YOUR REAR BUMPER
Remove your existing rear bumper according to the
manufacturer’s instructions, while retaining the
OEM hardware.
2) APPLY THE DELETE
Place the Delete over the frame and ensure the
Delete holes visually line up with the frame rail
holes.
3) INSTALL HARDWARE
Reinstall the OEM hardware while using a 16mm
socket for the two inner bolts, and an 18mm socket
for the two outer bolts.
FB22135
Jeep® ’07-’18 JK Wrangler
JK Rear Bumper Delete
2
4) HONORABLE MENTION: OPTIONAL
The Rear Bumper Delete fits and looks great with
our D-Ring Frame Mounts, Part# FB22136. Visit
www.FishboneOffroad.com for more info on this
perfect duo as well as installation instructions!
5) ENJOY YOUR NEW FISHBONE OFFROAD REAR
BUMPER DELETE!
/