Electrolux 727157 (RS13RX4H) Datasheet

Brand: Electrolux

Model: 727157 (RS13RX4H)

Type: Datasheet

Identification:

Technical

Bulletin no:

Date:

Issuer:

Factory:

D02-D04

CGX2004-17 (page 1 of 2), 2nd

04 May 2005

R. Sartor (DWS Customer Support)

DW Vallenoncello - Italy

Subject

Peristaltic Dispensers after Long Storage

Model

Undercounter and Hood Type with peristaltic rinse aid dispenser (atmospheric

boiler only) and/or peristaltic detergent dispenser.

Problem

The motor does not turn (or poor wash/rinse results) just after the machine

installation or the replacement of a dispenser.

Reason

The required torque is too high in case of local plastic deformation of the

peristaltic hose.

This plastic deformation always happens when the rollers holder is in the “12

o’clock” position and dispensers have been in storage for more than 15 days.

Action in

Factory

ASAP a dispenser motor with higher torque will be introduced.

In the meanwhile we have introduced following sheet in every machine with a

peristaltic dispenser:

ELECTROLUX PROFESSIONAL SPA

MAILING ADDRESS TELEPHONE WEBSITE VAT NO.

VIA SEGALUZZA, 30

33170 PORDENONE - ITALY

++39 0434 380650 www.electrolux.com 00072220932

OFFICE ADDRESS TELEFAX E-MAIL ADDRESS

VIA SEGALUZZA, 30

33170 PORDENONE - ITALY

++39 0434 380643 riccardo.sartor@electrolux.it

Action in

Field

Follow instructions above every time the motor does not start turning.

If the peristaltic hose is such squeezed that is deformed permanently, please,

remember that hoses have been available as spare part since year 1999 as

follow:

peristaltic hose

chemical spare part code material colour dispenser markets

049625 World-wide

Rinse Aid

049418

Sekobrill™

semi-transparent

0L0506 North America

049624 World-wide

Detergent 049419

Santoprene™

white

0L0507 North America

Electrolux 727157 (RS13RX4H) Datasheet

Electrolux 727157 (RS13RX4H) Datasheet

Electrolux 727157 (RS13RX4H) Datasheet

Related papers

Other documents