Extron TLP Pro 1220MG Template

Hello! I am an AI chatbot trained to assist you with the Extron TLP Pro 1220MG Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

P/N 68-2699-01

Rev. A

Outer Edge of Front Bezel

(Do not cut this line.)

Mounting Holes (4)

11.03"

(28.02 cm)

0.70"

(1.77 cm)

3.66"

(9.30 cm)

0.27"

(0.68 cm)

Cut-Out Template for the Extron

TLP Pro 1220MG

6.65"

(16.89 cm)

9.63"

(24.46 cm)

SURFACE

CUT-OUT

AREA

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

1. Confirm the product to be installed.

2. Before printing, check the print settings

and make sure the page is not scaled.

3. Remove the surface cut-out area (gray)

from the template. (Keep these instructions.)

4. Measure the cut-out and template.

5. Mark the position on the mounting surface

where the TLP Pro 1220MG is being installed.

6. Check dimensions and position, then cut

the opening.

2.72"

(6.91 cm)

0.70"

(1.77 cm)