Extron TLP Pro 1022M Template

Cut-Out Template for the Extron

TLP Pro 1022M

Outer Edge of Front Bezel

(Do not cut this line.)

1. Confirm the product to be installed.

2. Before printing, double-check the

print settings and make sure the

page is not scaled.

3. Remove the surface cut-out area

(gray) from the template.

4. Measure the cutout and template.

5. Mark the position on the mounting

surface where the TLP Pro 1022M

is being installed.

6. Double check dimensions and

position, then cut the opening.

Mounting Holes (4)

P/N 68-2976-01 Rev. A

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

2.72"

(6.92 cm)

2.76"

(7.00 cm)

9.06"

(23.00 cm)

0.725"

(1.84 cm)

SURFACE

CUT-OUT

AREA

7.68"

(19.51 cm)

5.93"

(15.06 cm)

0.725"

(1.84 cm)