![](//vs1.manuzoid.com/store/data-gzf/82b78aa1518e7dd6e5a9b434616dbe47/2/000860411.htmlex.zip/bg1.jpg)
Cut-Out Template for the Extron
HSA 300 US/EU/Multi-Region Models
0.25"
(0.64 cm) R
1. Confirm the product to be installed.
2. Before printing, double-check print
settings and make sure that the page is
not scaled.
3. Remove the surface cut-out area (gray)
from the template.
4. Measure the cutout and template.
5. Mark the position on the furniture where
the HSA 300 will be installed.
6. Double-check dimensions and position,
then cut the opening.
Page Size: 11" x 17"
Print Scale 1:1
Do not shrink.
7.70" (19.56 cm)
SURFACE
CUT-OUT
AREA
User Access
0.00" (0.00 cm)
0.02 (0.05 cm)
+
0.25" (0.64 cm)
Trim Ring Lip
Width
Trim Ring Outer Edge
(Do not cut this line.)
1.14"
(2.90 cm)
Table Clamp
P/N 68-2653-01 Rev. A
5.90"
(14.99 cm)