Commercial Electric 5042 Operating instructions

Brand
Commercial Electric
Model
5042
Type
Operating instructions
□ □
1
Installation
2
Hold the bracket backwards against the wall in desired
location and trace the inside with a pen or pencil.
TRACING THE BRACKET CUTOUT THE HOLE
Installation Guide
2-Gang Low Voltage Mounting Bracket
Item # 1000015588
Model #5042
PACKAGE CONTENTS
A - (1) 2-Gang Low Voltage Mounting Bracket
Use a drywall saw or utility knife to cutout the hole in the
install location.
CAUTION: When using tools always follow the
manufacturer’s safety guidelines.
Please read all instructions and safety information before use.
Retain this manual for future reference.
Safety Information
□
3 PLACING THE BRACKET
Place the bracket into the cutout and bend the tabs to secure
the bracket in place.
□
4 PULLING THE CABLES
You can now pull any low voltage cables through the opening
and install any 2-gang cable plate.
TOOLS NEEDED
Pencil
Drywall Saw or Utility Knife
RoHS Compliant
ETL LISTED
CONFORMS TO
UL STD. 498
CERTIFIED TO
C
AN/CSA STD. C22.2#42.1:200-1
3026001
01/29/2019
  • Page 1 1

Commercial Electric 5042 Operating instructions

Brand
Commercial Electric
Model
5042
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents