Commercial Electric 5042-5PK Operating instructions

Type
Operating instructions

Commercial Electric 5042-5PK

The Commercial Electric 5042-5PK is a low voltage mounting bracket designed for easy and secure installation of standard low voltage double gang (2-gang) wall plates. The bracket eliminates the need for screws, making installation quick and hassle-free.

With its simple installation process, the 5042-5PK allows you to quickly and securely mount low voltage devices such as light switches, dimmers, and outlets in your home or office. The bracket's sturdy construction ensures a firm hold, providing peace of mind that your devices will remain securely in place.

Commercial Electric 5042-5PK

The Commercial Electric 5042-5PK is a low voltage mounting bracket designed for easy and secure installation of standard low voltage double gang (2-gang) wall plates. The bracket eliminates the need for screws, making installation quick and hassle-free.

With its simple installation process, the 5042-5PK allows you to quickly and securely mount low voltage devices such as light switches, dimmers, and outlets in your home or office. The bracket's sturdy construction ensures a firm hold, providing peace of mind that your devices will remain securely in place.

5042 Rev 2
Tools Needed:
Pencil
Drywall Saw or Utility Knife
*Note* No Screws Needed
Installation
1. Hold Low Voltage Mounting Bracket
backwards flush to the wall in your desired
location of installation. Trace around the
inside the opening of the bracket with a pencil.
2. Cut along the traced line with a drywall saw
or utility knife.
3. Insert Low Voltage Mounting Bracket into
opening. Bending one tab at a time, fold
each of the four (4) tabs backwards until
they are flush against the inside of the wall.
This will hold the Low Voltage Mounting
Bracket in place.
4. Install any standard low voltage double
gang (2-gang) wall plate to the bracket.
Herramientas Necesarias:
Lápiz
Sierra para Drywall o Cuchilla para Uso General
*Nota* No Necesito Tornillos
Instalación
1. Sostén el Soporte de Montaje de Bajo Voltaje
hacia atrás a ras de la pared en la posición
deseada de instalación en que deseas instalarlo.
Traza con un lápiz la abertura del soporte
alrededor del interior.
2. Corta a lo largo de la línea trazada con una sierra
para drywall o cuchilla para uso general.
3. Inserta el Soporte de Montaje Bajo Voltaje en la
abertura. Dobla las cuatro (4) pestañas, una a
la vez, hacia atrás hasta que queden a ras
contra el interior de la pared. Esto sostendrá el
Soporte de Montaje de Bajo Voltaje en su lugar.
4. Instala en el soporte cualquier placa de pared
estándar de bajo voltaje, de doble salida
(2 salidas).
FOR LOW VOLTAGE USE ONLY
Always follow the NEC and comply with
National and Local Building and
Electrical Codes
SÓLO PARA USAR CON BAJO VOLTAJE
Siempre sigue el Código Eléctrico Nacional
y cumple con los Códigos Eléctricos y de
Construcción Locales
Instruction / Installation Sheet
2-Gang Low Voltage Mounting Bracket
No. 5042
Hoja de Instrucciones / Instalación
Soporte de Montaje de Bajo Voltaje, de 2 Salidas
Núm. 5042
DISTRIBUTED BY:
DISTRIBUIDO POR:
HOME DEPOT U.S.A., INC.
2455 PACES FERRY RD., N.W.
ATLANTA, GA 30339
FOR ASSISTANCE, CALL:
SI NECESITA AYUDA, LLAMA AL:
1-800-394-7519
HOMEDEPOT.COM
MADE IN CHINA
HECHO EN CHINA
  • Page 1 1

Commercial Electric 5042-5PK Operating instructions

Type
Operating instructions

Commercial Electric 5042-5PK

The Commercial Electric 5042-5PK is a low voltage mounting bracket designed for easy and secure installation of standard low voltage double gang (2-gang) wall plates. The bracket eliminates the need for screws, making installation quick and hassle-free.

With its simple installation process, the 5042-5PK allows you to quickly and securely mount low voltage devices such as light switches, dimmers, and outlets in your home or office. The bracket's sturdy construction ensures a firm hold, providing peace of mind that your devices will remain securely in place.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI