Winmate R19IH3S-MRA1FP User manual

Marine Panel PC

15”/19”/24”/26” PCAP touchscreen,

Intel 5th ® Generation Core™ i5-5200U 2.2GHz

ECDIS Series

Model No.:

R15IH3S-MRA3FP

R19IH3S-MRA1FP

W24IH3S-MRA1FP

W26IH3S-MRA1FP

User Manual

Version 1.0

Document Part Number: 9152111I100Z

ii

Preface

Copyright Notice

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s)conveys no license or title under any patent, copyright, or masks work rights to

these products, and make no representations or warranties that these products are free from

patent, copyright, or mask work right infringement, unless otherwise specified. Applications

that are described in this manual are for illustration purposes only. We make no

representation or guarantee that such application will be suitable for the specified use

without further testing or modification.

Warranty

Our warranty guarantees that each of its products will be free from material and

workmanship defects for a period of one year from the invoice date. If the customer discovers

a defect, we will, at his/her option, repair or replace the defective product at no charge to the

customer, provide it is returned during the warranty period of one year, with transportation

charges prepaid. The returned product must be properly packaged in its original packaging to

obtain warranty service. If the serial number and the product shipping data differ by over 30

days, the in-warranty service will be made according to the shipping date. In the serial

numbers the third and fourth two digits give the year of manufacture, and the fifth digit

means the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W14Axxxxxxxx means October of year 2014.

iii

Customer Service

We provide a service guide for any problem by the following steps: First, visit the website of

our distributor to find the update information about the product. Second, contact with your

distributor, sales representative, or our customer service center for technical support if you

need additional assistance.

You may need the following information ready before you call:

 Product serial number

 Software (OS, version, application software, etc.)

 Description of complete problem

 The exact wording of any error messages

In addition, free technical support is available from our engineers every business day. We are

always ready to give advice on application requirements or specific information on the

installation and operation of any of our products.

iv

Advisory Conventions

Four types of advisories are used throughout the user manual to provide helpful information or to

alert you to the potential for hardware damage or personal injury. These are Notes, Important,

Cautions, and Warnings. The following is an example of each type of advisory.

NOTE:

A note is used to emphasize helpful information

IMPORTANT:

An important note indicates information that is important for you to know.

CAUTION/ ATTENTION

A Caution alert indicates potential damage to hardware and explains how to avoid the

potential problem.

Une alerte d’attention indique un dommage possible à l’équipement et explique

comment éviter le problème potentiel.

WARNING!/AVERTISSEMENT!

An Electrical Shock Warning indicates the potential harm from electrical hazards and

how to avoid the potential problem.

Un Avertissement de Choc Électrique indique le potentiel de chocs sur des

emplacements électriques et comment éviter ces problèmes.

ALTERNATING CURRENT / MISE À LE TERRE!

The Protective Conductor Terminal (Earth Ground) symbol indicates the potential

risk of serious electrical shock due to improper grounding.

Le symbole de Mise à Terre indique le risquépotential de choc électrique grave à la

terre incorrecte.

v

Safety Information

WARNING! / AVERTISSEMENT!

Always completely disconnect the power cord from your chassis whenever

you work with the hardware. Do not make connections while the power is

on. Sensitive electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should open the PC chassis.

Toujours débrancher le cordon d’alimentation du chassis lorsque vous

travaillez sur celui-ci. Ne pas brancher de connections lorsque l’alimentation

est présente. Des composantes électroniques sensibles peuvent être

endommagées par des sauts d’alimentation. Seulement du personnel

expérimenté devrait ouvrir ces chassis.

CAUTION/ATTENTION

Always ground yourself to remove any static charge before touching the CPU

card. Modern electronic devices are very sensitive to static electric charges. As

a safety precaution, use a grounding wrist strap at all times. Place all

electronic components in a static-dissipative surface or static-shielded bag

when they are not in the chassis.

Toujours verifier votre mise à la terre afin d’éliminer toute charge statique

avant de toucher la carte CPU. Les équipements électroniques moderns sont

très sensibles aux décharges d’électricité statique. Toujours utiliser un

bracelet de mise à la terre comme précaution. Placer toutes les composantes

électroniques sur une surface conçue pour dissiper les charge, ou dans un sac

anti-statique lorsqu’elles ne sont pas dans le chassis.

vi

Safety Precautions

For your safety, carefully read all the safety instructions before using the device and

follow all warnings and cautions marked on the product. Keep this user manual for future

reference.

 Always disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

 For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

 Keep this equipment away from humidity.

 Put this equipment on a reliable surface during installation. Dropping it or letting it

fall could cause damage.

 The openings on the enclosure are for air convection and to protect the equipment

from overheating.

CAUTION/ATTENTION

Do not cover the openings!

Ne pas couvrir les ouvertures!

 Before connecting the equipment to the power outlet make sure the voltage of the

power source is correct.

 This product is equipped with a 3-wire grounding type plug, a plug having a third

(grounding) pin. This plug will only fit into a grounding-type power outlet. This is a

safety feature. If you are unable to insert the plug into the outlet, contact your

electrician to replace your obsolete outlet. (For AC version only).

 Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

 If the equipment is not used for a long time, disconnect it from the power source to

avoid damage by transient over-voltage.

 Never pour any liquid into an opening. This could cause fire or electrical shock.

 Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

 All cautions and warnings on the equipment should be noted.

*Let service personnel to check the equipment in case any of the following problems

appear:

o The power cord or plug is damaged.

o Liquid has penetrated into the equipment.

o The equipment has been exposed to moisture.

o The equipment does not work well or you cannot get it to work according

to the user manual.

o The equipment has been dropped and damaged.

vii

o The equipment has obvious signs of breakage.

 Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the

equipment.

CAUTION/ATTENTION

Use the recommended mounting apparatus to avoid risk of injury.

Utiliser l’appareil de fixation recommandé pour éliminer le risque

de blessure.

WARNING!/AVERTISSEMENT!

Only use the connection cords that come with the product. When

in doubt, please contact the manufacturer.

Utiliser seulement les cordons d’alimentation fournis avec le

produit. Si vous doutez de leur provenance, contactez le

manufacturier.

WARNING!/AVERTISSEMENT!

Always ground yourself against electrostatic damage to the

device.

Toujours vérifier votre mise à la terre afin que l’équipement ne se

décharge pas sur vous.

 Cover workstations with approved anti-static material. Use a wrist strap

connected to a work surface and properly grounded tools and equipment.

 Use anti-static mats, heel straps, or air ionizer for added protection.

 Handle electrostatic-sensitive components, PCB’s and assemblies by the case or

the edge of the board.

 Avoid contact with pins, leads, or circuitry.

 Turn off power and input signals before inserting and removing connectors or test

equipment.

 Keep the work area free of non-conductive materials, such as ordinary plastic

assembly aids and Styrofoam.

 Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners that

are conductive.

 Always put drivers and PCB’s component side on anti-static foam.

viii

Important Information

Countries/ Area

Symbol

This equipment complies with essential requirements of:

USA

FCC Part 15 Subpart B Regulations Class B

European Union

Electromagnetic Compatibility Directive(2014/30/EU)

Low Voltage Directive (2014/35/EU)

Restrictions of the use of certain hazardous substances

(RoHS) Directive (2011/65/EU)

Internationally

Marine

IEC 60945 4

th

Edition

Federal Communications Commission Radio Frequency Interface Statement

This device complies with part 15 FCC rules.

Operation is subject to the following two conditions:

 This device may not cause harmful interference.

 This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "B" digital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference

at him own expense.

ix

European Union

This equipment is in conformity with the requirement of the following EU

legislations and harmonized standards. Product also complies with the Council

directions

Electromagnetic Compatibility Directive (2004/108/EC)

 EN55024: 2010 EN 55022: 2010 Class B

 IEC61000-4-2: 2008 EN61000-3-2: 2006+A1: 2009+A2: 2009

 IEC61000-4-3: 2006+A1: 2007+A2: 2010 EN61000-3-3: 2013

 IEC61000-4-4: 2012

 IEC61000-4-5: 2014

 IEC61000-4-6: 2013

 IEC61000-4-8: 2009

 IEC61000-4-11: 2004

Low Voltage Directive (2006/95/EC)

 EN 60950-1:2006/A11:2009/A1:2010/A12:2011

x

About This User Manual

This User Manual provides information about using the Winmate® ECDIS Marine Panel PC.

The documentation set for the Winmate® ECDIS Marine Panel PC provides information for specific

user needs, and includes:

 ECDIS Marine Panel PC Quick Start Guide - - describes how to get the display up and

running.

 ECDIS Marine Panel PC User Manual – contains detailed description on how to use the

display, its components and features.

NOTE:

Some pictures in this guide are samples and can differ from actual product.

Model Number Naming Rule

R19IH3S-MRXXFP

Item

Description

Note

R

Panel Type

19

Panel Size

IH3S

CPU Platform

MR

Mechanical Type

XX

Panel Model

FP

Touch Type

Document Revision History

Version

Date

Note

Author

1.0

28-Jul-2016

Initial document release

Austin Chang

xi

Contents

Preface ........................................................................................................................................ ii

About This User Manual ............................................................................................................... x

1 Introduction .............................................................................................................................. 1

1.1 Product Features ............................................................................................................ 1

1.2 Function Block Diagram ....................................................................................................... 2

1.3 Packing List ........................................................................................................................... 3

1.3.1 Accessories ................................................................................................................ 3

1.3.2 Options ...................................................................................................................... 4

1.4 Appearance .......................................................................................................................... 5

1.4.1 Appearance 15” ......................................................................................................... 5

1.4.2 Appearance 19” ......................................................................................................... 6

1.4.3 Appearance 24” and 26” ........................................................................................... 7

1.4.5 Capacitive Touch OSD Control Panel ......................................................................... 8

1.4.6 ECDIS Mode Indicators .............................................................................................. 9

1.5 Dimensions ......................................................................................................................... 10

1.5.1 Dimensions 15” ....................................................................................................... 10

1.5.2 Dimensions 19” ....................................................................................................... 10

1.5.3 Dimensions 24” ....................................................................................................... 11

1.5.4 Dimensions 26” ....................................................................................................... 11

2 Mounting Solutions ................................................................................................................. 13

2.1 Cable Mounting Considerations ........................................................................................ 13

2.2 Safety Precautions ............................................................................................................. 13

2.3 Mounting Guide ................................................................................................................. 15

2.3.2 Panel/ Flush Mount ................................................................................................. 15

2.3.4 VESA Mount ............................................................................................................. 16

3 Getting Started........................................................................................................................ 19

3.1 Powering On ....................................................................................................................... 19

3.1.1 AC Adapter Components ......................................................................................... 19

3.1.2 Connecting the Power ............................................................................................. 20

3.2 Connector Pinouts ............................................................................................................. 22

xii

3.2.1 DC Input Connector ................................................................................................. 22

3.2.2 Serial Port Connector .............................................................................................. 22

3.2.3 Two USB 3.0 Connectors ......................................................................................... 23

3.2.4 USB2.0 Connector ................................................................................................... 23

3.2.5 HDMI Connector ...................................................................................................... 23

3.2.6 LAN (RJ45) Connector .............................................................................................. 24

3.2.7 Digital Input / Output Connector (optional) ........................................................... 24

3.2.8 Optional NMEA 0183 Port ....................................................................................... 24

3.3 Installing 2.5" Removable HDD .......................................................................................... 25

3.4 Turning On/ Off .................................................................................................................. 26

3.4.1 Turning on ............................................................................................................... 26

3.4.2 Turning off ............................................................................................................... 26

3.5 ECDIS Mode Brightness Adjustment .................................................................................. 27

3.5.1 Introduction ............................................................................................................. 27

3.5.2 Switching to DAY Mode ........................................................................................... 28

3.5.3 Switching to DUSK Mode ......................................................................................... 28

3.5.4 Switching to NIGHT Mode ....................................................................................... 28

4 Operating the Device ............................................................................................................... 30

4.1 Hot Tab Introduction.......................................................................................................... 30

4.1.1 Installing Touch Key HotTab Control Utility ............................................................ 30

4.1.2 Hot Tab Main Menu ................................................................................................ 30

5 Driver Installation ................................................................................................................... 41

5.1 Chipset Driver..................................................................................................................... 41

5.2 Graphics Driver .................................................................................................................. 44

5.3 Audio Driver ....................................................................................................................... 47

5.4 Ethernet Driver .................................................................................................................. 49

5.5 Fintek COM Port Driver ...................................................................................................... 52

5.6 Intel® Management Engine Software ................................................................................ 55

5.7 USB 3.0 Driver Installation (Windows 7) ............................................................................ 58

5.8 Winmate Digital I/O Driver ................................................................................................ 62

5.8.1 Uninstall Old Driver ................................................................................................. 63

xiii

5.8.2 Install New Driver .................................................................................................... 64

5.9 Capacitive Touch Key AP .................................................................................................... 67

6 BIOS Setup .............................................................................................................................. 71

6.1 When and How to Use BIOS Setup .................................................................................... 71

6.2 BIOS Functions ................................................................................................................... 71

6.2.1 Main Menu .............................................................................................................. 72

6.2.2 Advanced Settings ................................................................................................... 73

6.2.3 Boot Menu ............................................................................................................... 92

6.2.4 Security Menu ......................................................................................................... 94

6.2.5 Save & Exit ............................................................................................................... 95

6.3 Using Recovery Wizard to Restore Computer ................................................................... 97

7 Technical Support .................................................................................................................. 100

7.1 Software Developer Support ........................................................................................... 100

7.1.1 Winmate Download Center ................................................................................... 101

7.1.2 Winmate File Share ............................................................................................... 101

7.2 Problem Report Form ...................................................................................................... 102

Appendix A Technical Specifications ......................................................................................... 104

A1 Panel PC Technical Specifications ..................................................................................... 104

Appendix B PCAP Touchscreen ................................................................................................. 107

B1 Technology Overview ....................................................................................................... 107

B2 Touchscreen Technical Specifications .............................................................................. 107

ECDIS Marine Panel PC

1

Introduction

This chapter gives you product overview,

describes features and hardware

specification. You will find all accessories

that come with your device in the packing

list. Mechanical dimensions and drawings

included in this chapter.

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

1

1 Introduction

Modern marine sector requires durable devices that can withstand long periods

submersed in water. Winmate® ECDIS Marine Series Panel PC is suitable for navigation,

ship automation, and surveillance, rugged industrial and light military applications.. Flat

surface is easy-to-clean and delivers aesthetically pleasing look. Due to dimmable

backlight the Panel PC suitable for high and low ambient light conditions. You can mount

the Panel PC on the bridge of a ship.

The device powered by Intel 5th ® Generation Core TM i5-5200U 2.2GHz processor and

supports various Windows-based operating systems: Windows 10 IoT Enterprise,

Windows Embedded 8.1 Industry PRO, Windows Embedded 8 Std, Windows Embedded

Std. 7, and Windows 7 PRO for Embedded System. The Panel PC features user-friendly

and resistant to scratches PCAP touch-screen. These models sealed with front IP 65 dust

and water proof.

All ECDIS Marine Series Panel PC meet the requirements of industrial marine standards,

including IEC60945 4th Edition, DNV2.4.

1.1 Product Features

Winmate® ECDIS Series Marine Panel PC offers the following features:

 Projective capacitive multi-touch screen

 Intel 5th ® Generation Core™ i5-5200U 2.2GHz

 Edge-to-edge narrow bezel design and fanless cooling system

 Color calibrated for ECDIS compliance

 Capacitive touch keys for quick function access and display control (Support

ECDIS DAY, DUSK, and NIGHT mode switching)

 Optional 4 x COM port (NMEA 0183 protocol) 422/485 switchable via software

 Compliant with marine standards (DNV2.4, IEC 60945 4th, IACS-E10)

 Support capacitive touch key lock / touchscreen lock function

Approved Marine Panel PC

Winmate’s Marine product line designed to follow IEC-60945 Maritime Navigation and

Radio-communication Equipment and Systems requirements. Marine Panel PC series

line varies in screen size from 19 inches to 26 inches. By testing for usability in a ship’s

wheelhouse during different ambient light conditions we developed products that

meet demands in maritime applications especially for navigation, ship automation and

maritime surveillance.

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

2

1.2 Function Block Diagram

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

3

1.3 Packing List

Carefully remove the box and unpack your device. Please check if all the items listed

below are inside your package. If any of these items are missing or damaged contact us

immediately.

1.3.1 Accessories

Standard factory shipment list:

Panel PC

Driver CD & User Manual

Quick Start Guide

(Hardcopy)

Power Cord

(varies in appearance

by region and country)

*AC Adapter

(12V/ 80W)

3-pin Terminal Block

(Phoenix type)

**M4 x 12 black screw

bolts

*AC adapter, 3-pin terminal block, and power cord shipped with Panel PC for testing

purposes only.

** Notice: Only to be used to screw the display onto a console from the rear side. If you

prefer your own bolts, please make sure to use M4 and 30mm in length.

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

4

1.3.2 Options

Package may include optional accessories based on your order.

Four 5-pin Terminal Block 3.81

(Phoenix Type)

For NMEA port

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

5

1.4 Appearance

This section contains appearance of the Panel PC and I/O layout.

1.4.1 Appearance 15”

No

Description

No

Description

①

4 x NMEA 0183 Port (optional)

⑤

1 x RS232/422/485

②

2 x RJ-45 LAN

⑥

1 x USB2.0

③

1 x HDMI

⑦

1 x DI/DO 8 Channel (optional)

④

2 x USB 3.0

⑧

1 x DC Power Input

User Manual Chapter 1 Introduction

ECDIS Marine Panel PC

6

1.4.2 Appearance 19”

No

Description

No

Description

①

4 x NMEA 0183 Port (Optional)

⑤

1 x RS232/422/485

②

2 x LAN (RJ-45)

⑥

1 x USB 2.0

③

1 x HDMI

⑦

1 x Digital input/output 8 Channel

(Optional)

④

2 x USB 3.0

⑧

1 x DC Power Input

Page is loading ...

Winmate R19IH3S-MRA1FP User manual

This manual is also suitable for

Winmate R19IH3S-MRA1FP User manual

Related papers

Other documents