Gianni Industries CP-31GP Installation guide

Gianni Industries
Brand
Gianni Industries
Model
CP-31GP
Type
Installation guide
Take the clear cover off. Insert test key into the test hole, so that plastic glass will tilt to one
side, switch contact will then change from NC to NO status. When completed, remove the
test key, so that it reverses back to the NC status.
Instructions:
Take the clear cover off. Press off to break the plastic glass before releasing the switch
contacts. When the switch contact changes from the NC into NO status, the connecting
device is triggered.
After removing the screws on the top box, the plastic glass (CP-31-PL) can be replaced,
so that it reverses back to the NC status.
Model: CP-31-PL
P-MU-CP-31GP Published: 2014.09.02
Copyright © All Rights Reserved
Dimensions: 87x87x55 mm
Contact Resistance: 100mΩ
Switch Rated: 5A 125/250 VAC
Specifications:
(OPTIONAL)
CP-31GP SERIES BREAK PLASTIC GLASS CALL POINT INSTRUCTIONS
Applications:
Test Methods:
Emergency Use:
Power Supply Power Supply
Alarm
Electromagnetic
locks (Locked)
Switch 1 Switch 2
Power Supply Power Supply
Alarm
NC
COM
NO
NC
COM
NO
NC
COM
NO
NC
COM
NO
Electromagnetic
locks (Unlocked)
Switch 1 Switch 2
N/O
N/C
COM
LOCKED
N/O
N/C
COM
LOCKED
N/O
N/C
COM
LOCKED
N/O
N/C
COM
UNLOCKED
N/O
N/C
COM
LOCKED
N/O
N/C
COM
LOCKED
N/O
N/C
COM
UNLOCKED
N/O
N/C
COM
UNLOCKED
Test Key
87x93x55 mm (Included Cover)
(Plastic Glass: 4-piece Replacements)
Unit: mm
87
55
87
  • Page 1 1

Gianni Industries CP-31GP Installation guide

Gianni Industries
Brand
Gianni Industries
Model
CP-31GP
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents