Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

1

TP200 Rev. A

003-2863-00 Rev. AA1 (1/16/20)

Contents:

Installation ...........1-5

Exploded View ........ 6

Special Tools:

none

Language of origin: English

Tall Cabinet Drawer Keyless Double

Lock Installation [002-1974-xx]

Screw

Slides

Slide

Mullion

Note

This install can be used for any Tall Cabinet Double Drawer Keyless Lock installation. The assembly

process will be the same. The Lock Bar will be a different size depending on the number of drawers.

Step 1:

Remove drawers and slides as needed from cabinet.

Remove screws (3) from Mullion inside the cabinet to release.

Style A

2

TP200 Rev. A

003-2863-00

Step 7:

Install wire linkage into slide bracket.

Step 5:

Install slide bracket and slide bracket spacers as

shown.

Step 2:

Measure from edge of mullion mark and drill 3/4” hole

through mullion.

Mullion

CAB WIDTH

Lock Position

12” 4 - 25/32”

15”, 18”, 21” & 24” 4 - 7/8”

30” & 36” 5”

Step 6:

Install mullion onto cabinet with screws(3).

Mullion

Wire

Linkage

Slide

Bracket

Slide

Bracket

Spacers

Step 4:

Measure 1/4” from 3/4” hole and mark as shown. Use hole

punch and hammer to start mounting holes. Note: Make

sure mounting mark is parallel with mullion.

Step 3:

Measure 2-25/32” from 3/4” hole and mark hole as shown.

Drill 5/32” hole in mullion. Insert Thread Insert groove first

into mullion. Note: Keep insert flush with mullion face.

2-25/32”

5/32”

Drill Bit

Thread

Insert

3/4”

Hole

1/4”

Groove

3

TP200 Rev. A

003-2863-00

Step 9:

Install cam lock into mullion from inside cabinet making

sure lock bar spring is on top as shown.

Step 13:

Secure lock bar bracket onto lock bar with screw provided.

Screw

Lock Bar

Bracket

Lock Bar

Step 8:

Assemble cam lock onto wire linkage and lock bar

spring onto cam lock.

Lock Bar

Spring

Cam

Lock

Step 12:

Inside cabinet install lock bar into slots as shown.

Step 11:

Install lock bar onto lock bar spring.

Lock Bar

Spring

Lock Bar

Wire

Linkage

Cam

Lock

Lock Bar

Spring

Slots

Step 10:

Use manufacture’s instructions to assemble Keyless Lock.

Note: After assembling lock, continue to Step 11 for

installation of Lock Bar.

4

TP200 Rev. A

003-2863-00

Step 15:

Install lock bar onto lock bar spring.

Lock Bar

Step 17:

Secure lock bar bracket onto lock bar with screw provided.

Lock Bar

Spring

Lock Bar

Screw

Lock Bar

Bracket

Step 14:

Install lock bar spring onto slide bracket.

Lock Bar

Spring

Slide

Bracket

Step 16:

Inside cabinet install lock bar into slots as shown.

Note: Lock bars will vary but assembly process is the

same.

Lock Bar

Step 18:

Re-install slides with screws as needed.

Slide

Screw

Slots

5

TP200 Rev. A

003-2863-00

Step 19:

Install drawer brackets as needed on drawer or filing drawers.

Note: Numbers of bracket(s) and screw(s) will vary with

number of drawers.

Drawer

Bracket

Drawer

Bracket

Step 20:

Re-install drawers and test lock.

6

TP200 Rev. A

003-2863-00

all

002-1974-xx Tall Cabinet Drawer Keyless

Double Lock Kit - (see chart on next page)

(includes items 1 thru 16)

Item Description Qty.

1 • Lock Bar Bracket 1

2 • Screw (#10 -24 x 3/8”) 2

3 • Lock Bar Spring 2

4 • Screw (#6 x 5/8”) 8

5

• Wire Linkage

a) 4” (18” Cabinet Width)

b) 7” (21” Cabinet Width)

c) 10” (24” Cabinet Width)

d) 15.5” (30” Cabinet Width)

e) 21.5” (36” Cabinet Width)

1

6 • Slide Bracket 1

7 • Slide Bracket Spacer 2

8 • Cam Lock 1

9 • Press-Fit Thread Insert 1

10 • Keyless Lock 1

11

• RH Lock Bar

Contact Technical Service for Part Numbers

1

12 • LH File Lock Bracket - (1 per Drawer) AR

13 • RH File Lock Bracket - (1 per Drawer) AR

14 • Drawer Lock Bracket - (1 per Drawer) AR

15 • Screw (#10 x 5/8”) - (1 per Lock Bracket) AR

Serial Numbers / Dates:

all

050-9920-00-791 1

040-0010-109 2

025-0122-00 3

040-0006-71 4

016-1706-00 10

042-0688-00 9

040-0010-48 15

4

029-6576-00 8

050-9816-00-791 6

050-2585-00 7

4

2

1

3

050-9995-00-791 14

050-9702-00-791 13

4

050-9701-00-791 12

a) 016-1671-00 5

b) 016-1671-01

c) 016-1671-02

d) 016-1671-03

e) 016-1671-04

11 a) 2-2” or 1-4” Drawer(s)

b) 4-2” or 2-4” Drawers

c) 36” (Cabinet Height)

d) 34” (Cabinet Height)

e) 30” (Cabinet Height)

11

7

TP200 Rev. A

003-2817-00

Lock Kit Cabinet Width Used on:

002-1974-00 30” Tall Cabinet: 2 - 2” / 1 - 4” Drawers

002-1974-01 36” Tall Cabinet: 1 - 4” Drawers

002-1974-02 30” Tall Cabinet: 4 - 2” / 2 - 4” Drawers

002-1974-03 36” Tall Cabinet: 2 - 4” Drawers

002-1974-04 30” Tall Cabinet: All Drawers

002-1974-05 36” Tall Cabinet: All Drawers

002-1974-06 18” Tall Cabinet: All / 1 - File Drawer

002-1974-07 21” Tall Cabinet: All / 1 - File Drawer

002-1974-08 24” Tall Cabinet: All / 1 - File Drawer

002-1974-09 30” Tall Cabinet: All / 1 - File Drawer

002-1974-10 36” Tall Cabinet: All / 1 - File Drawer

002-1974-11 18” Tall Cabinet: All / 2 - File Drawers

002-1974-12 21” Tall Cabinet: All / 2 - File Drawers

002-1974-13 24” Tall Cabinet: All / 2 - File Drawers

002-1974-14 30” Tall Cabinet: All / 2 - File Drawers

002-1974-15 36” Tall Cabinet: All / 2 - File Drawers

Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

This manual is also suitable for

Midmark Synthesis® Cabinetry - Side Cabinetry Installation guide

Related papers

Other documents