Page is loading ...
1
TP200 Rev. A
003-2865-00 Rev. AA2 (1/16/20)
Contents:
Installation ...........1-4
Exploded View ........ 5
Special Tools:
none
Language of origin: English
Base Door
Overhead
Door
[002-1976-xx] Base & [002-1978-xx] Overhead
Double Door Keyless Lock Installation
Style A
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
2
TP200 Rev. A
003-2865-00
Step 1: Base Cabinet
Measure down from top of door 2” (5.1 cm) and mark
door. Measure from edge of door 1-5/16” (3.3 cm) and
mark door.
Note: May need to remove handle to make
measurements.
Step 1: Overhead
Measure up from bottom of door 2” (5.1 cm) and mark
door. Measure from edge of door 1-5/16” (3.3 cm) and
mark door.
Note: May need to remove handle to make
measurements.
2”
(5.1 cm)
1-5/16”
(3.3 cm)
2”
(5.1 cm)
1-5/16”
(3.3 cm)
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
3
Step 5:
Measure 2-25/32” from 3/4” hole and mark hole as shown.
Step 4:
Use hole punch and hammer to start mounting holes.
Install cam lock into inside of door and secure with
screws (x2).
TP200 Rev. A
003-2865-00
Step 2:
Drill 3/4” hole through front of door.
3/4”
Hole
Correct
Inside
of Door
Correct
1/4”
Step 3: Base Door
Measure 1/4” from 3/4” hole and mark as shown.
Note: Make sure mounting mark is parallel with edge
of door.
3/4”
Hole
Step 3: Overhead
Measure 1/4” from 3/4” hole and mark as shown.
Note: Make sure mounting mark is parallel with edge
of door.
1/4”
3/4”
Hole
2-25/32”
5/32”
Drill Bit
Thread
Insert
3/4”
Hole
Groove
Inside
of Door
2-25/32”
2-25/32”
2-25/32”
Base
Doors
Overhead
Doors
Step 6:
Drill 5/32” hole in door. Push Thread Insert groove first
into door. Note: Keep insert flush with mullion face.
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
4
Screw
Step 12:
Install door plate onto inside of door and secure with
screws (x3).
Step 11:
Use hole punch and hammer to start mounting holes.
TP200 Rev. A
003-2865-00
Step 9:
On door plate measure and mark 1/2” .
Step 8:
Measure down to find center of opposite door.
Center
of Door
Door
Plate
Inside
of Door
Step 10:
Using mark on door plate and center mark on door place
door plate on inside of door and mark hole locations.
Center
Inside
of Door
Door
Plate
Door
Plate
1/2”
Step 7: (Base shown)
Use manufacture’s instructions to assemble Keyless Lock.
Place cover cap on inside of door. Note: After assembling
lock, continue to Step 8 to finish installation.
Door
Face
Cover
Cap
Inside
of Door
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
5
003-2865-00
all
002-1976-xx Base Double Door
002-1978-xx Overhead Double Door
Keyless Lock Kit
(includes items 1 thru 6)
Item Description Qty.
1
• Keyless Lock
a) Left Hand Lock (shown)
b) 90° Vertical Lock
c) Right Hand Lock
d) 270° Vertical Lock
1
2 • Press-Fit Thread Insert 1
3 • Cover Cap 1
4 • Flat Head Screw (#6 x 5/8”) 2
5 • Cam Lock 3
6 • Pan Head Screw (#6 x 5/8”) 1
7 • Door Plate 1
Serial Numbers / Dates:
all
TP200 Rev. A
2 042-0688-00
029-6655-00 5
6 040-0006-63
4 040-0006-71
a) 016-1706-00 1
b) 016-1706-01
c) 016-1706-02
d) 016-1706-03
3 016-0916-01
Keyless
Lock Kit #
Unit Panel Style
002-1976-00 Base Cabinet Serenity / Pinnacle / Transcend
002-1976-01 Base Cabinet Renew / Cove
002-1978-00 Overhead Cabinet Serenity / Pinnacle / Transcend
002-1978-01
Overhead Cabinet Renew / Cove
050-0366-00 7
© 2015 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 | www.midmark.com
/
