2. KC HiLiTES
  3. 42301

KC HiLiTES 42301 Installation guide

  • Hello! I've reviewed the installation instructions for the KC HiLiTES TJ 4230/42301 Replacement Headlight. This document provides a step-by-step guide on how to remove your existing headlight and install the new KC headlight. I'm ready to help answer any questions you have regarding the installation process and other information in the document.
  • What tools are needed for the installation?
    How do you remove the headlight bezel?
    How do you access the headlight?
Thanks for choosing a KC HiLiTES product. We take pride in building the highest quality, best engineered
systems possible. Your satisfaction with our product is important, so if you have any questions, please call
our customer service line at 800-528-0950.
Tools Needed:
* Phillips Screwdriver
Installing the KC Replacement TJ Headlight:
1. Remove the three Phillips screws from the headlight bezel. Grab the bezel and remove it from around the
headlight.
2. Remove the four Phillips screws from the headlight retaining ring. Remove the retaining ring away to access
the headlight.
3. Hold the headlight and pull it toward you. On the back of the headlight, you will find an electrical plug; unplug it
from the headlight.
4. Connect the electrical plug onto the back of the H-4 Bulb in your new KC Replacement Headlight. Insert the
headlight back into its mount (hold it place). Position the retaining ring around the headlight and install the four
Phillips screws to secure it.
5. Reattach the headlight bezel around the headlight and install the three Phillips screws to finish.
6. Your DONE! ---- enjoy.
Installation Instructions for
Replacement TJ Headlight
#4230/42301
KC HiLiTES, Inc. 2843 W. Avenida de Luces, Williams, Arizona 86046-0155 * 800-528-0950 * www.kchilites.com KC031411R
IF YOU HAVE ANY PROBLEMS
OR QUESTIONS, PLEASE CALL
CUSTOMER SERVICE AT 800-528-0950
See details on our website at
www.kchilites.com
23 Year Warranty
/