2. BLOTZ
  3. B28-SF-501

BLOTZ B28-SF-501 Assembly Instructions

  • Hello! I'm a chat assistant that has analyzed the provided instructions for building the Barricade B28-SF-501. I see that the document contains steps for assembling two barricades using glue and other tools. I'm here to help you with any questions you have about the assembly process or the other topics covered in the instructions.
  • What type of glue is required?
    What tool is required to remove parts from the sprue?
    Can I use pegs or elastic bands during assembly?
28mm Crashed Starship - Barricades
B28-SF-501
Please read these instructions fully before starting construction.
PVA or equivalent glue will be required to stick sections together.
Sand paper can be used to gently clean any joints.
A sharp modelling knife will be required to remove sections from the sprue. Please use knives with due care and
remember to cut away from yourself at all times.
During the construction of this model, you may find it convenient to use pegs / elastic bands to hold pieces in
place while you allow glue to dry.
The pieces for barricade #1.
Glue the supports to the back of the “wall” using the
lugs / holes provided.
The pieces for barricade #2
Glue the supports to the back of the “wall” using the
lugs / holes provided.
The completed barricades
/