DPGPS-Series

HK Instruments DPGPS-Series User manual

  • Hello! I'm your chat assistant. I have read the HK Instruments DPG/PS series filter alert installation instructions, and I'm ready to assist you with any questions you may have about these devices. The document includes information on the product's specifications, applications, installation procedures, and safety warnings. Feel free to ask me anything about the filter alerts' features, like accuracy, switching points, or operating environment.
  • What is the operating temperature range for the filter alerts?
    What type of media is compatible with the DPG/PS series?
    What is the maximum pressure for DPG/PS series?
    What is the protection standard for the filter alerts?
Copyright HK Instruments 2021 www.hkinstruments. Installaon version 5.0 2021
INSTALLATION
INSTRUCTIONS
FILTER ALERTS
DPG/PS Series
READ THESE INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO INSTALL, OPERATE OR SERVICE THIS
DEVICE.
• Failuretoobservesafetyinformaonandcomplywith
instruconscanresultinPERSONALINJURY,DEATHAND/OR
PROPERTY DAMAGE.
• Toavoidelectricalshockordamagetoequipment,disconnect
powerbeforeinstallingorservicinganduseonlywiringwith
insulaonratedforfulldeviceoperangvoltage.
• Toavoidpotenalreand/orexplosiondonotuseinpotenally
ammableorexplosiveatmospheres.
• Retaintheseinstruconsforfuturereference.
• Thisproduct,wheninstalled,willbepartofanengineered
systemwhosespecicaonsandperformancecharacteriscs
arenotdesignedorcontrolledbyHKInstruments.Review
applicaonsandnaonalandlocalcodestoassurethatthe
installaonwillbefunconalandsafe.Useonlyexperiencedand
knowledgeabletechnicianstoinstallthisdevice.
SPECIFICATIONS
Thank you for choosing an HK Instruments DPG/PS series lter
alert. In many situaons lter monitoring requires an alarm signal
andalocaldisplay.Ourlteralertsaretherightsoluonforthese
situaons. The DPG/PS lter alerts combine dierenal pressure
switcheswithgaugesintoonepraccalproductoering.
Thelteralertsareasoluonforsystemsrequiringvisualindicaonof
pressureonsiteandaswitchingpointsignal.Thelteralertsareideal
forgeneral-purposeworkinair-condioningandvenlaon,especially
inmonitoringofairltersforcontaminaon.
SPECIFICATIONS
Performance
Accuracy of gauge (FS 20 °C):
±2 %
Switching dierence:
DPG200/PS200:20Pa
DPG300/PS300:20Pa
DPG500/PS500:20Pa
DPG600/PS600:30Pa
DPG1,5K/PS1500:80Pa
Accuracy of switching point (Low limit typ.):
DPG200/PS200:20Pa±5Pa
DPG300/PS300:30Pa±5Pa
DPG500/PS500:30Pa±5Pa
DPG600/PS600:40Pa±5Pa
DPG1,5K/PS1500:100Pa±10Pa
Accuracy of switching point (HIgh limit typ.):
DPG200/PS200:200Pa±20Pa
DPG300/PS300:300Pa±40Pa
DPG500/PS500:500Pa±30Pa
DPG600/PS600:600Pa±30Pa
DPG1,5K/PS1500:1500Pa±50Pa
Electrical rang, resisve load:
3A/250VAC(DPG200/PS200:0.1A/250VAC)
Electrical rang, resisve load:
2A/250VAC(DPG200/PS200:-)
Maximum pressure:
50kPa
Service life:
>1000000switchingoperaons
Technical Specicaons
Media compability:
Dryairornon-aggressivegases
Measuring units:
Pa
Environment:
Operangtemperature:-5...+60°C
Storagetemperature:-40...+85°C
Physical
Case (DPG & PS):
ABS
Cover (DPG & PS):
PC
Membrane (DPG & PS):
Silicone
Machinery (DPG):
Aluminumandsteelspring
Duct connectors (PS):
ABS
Tubing (PS):
PVC,so
Protecon standard:
IP54
Electrical connecons:
3-screwterminal
Cable entry:
M16
Pressure ngs:
Male ø 5 mm
Weight:
510g
Conformance
Meetstherequirementsfor:
CE:  UKCA:
RoHS:  2011/65/EU S.I.2012/3032
LVD/EESR: 2014/35/EU S.I.2016/1101
WEEE:  2012/19/EU S.I.2013/3113
INTRODUCTION
APPLICATIONS
WARNING
RoHS
COMPLIANT
Copyright HK Instruments 2021 www.hkinstruments. Installaon version 5.0 2021
DIMENSIONAL DRAWINGS
D
600
IP 54
T
500
300
400
100
a
F
F
P
I
P
:
e
p
y
S
0
0
6
a
P
0
3
40
200
500
400
Pa
200
0
P.max.100 kPa
100
300
DPG500
Made in Finland
ZERO SET
136
68
219
83,5
107,25
15
5,5
6,5
6,5
INSTALLATION CONTINUED
Thesellerisobligatedtoprovideawarrantyofveyearsforthedeliv-
eredgoodsregardingmaterialandmanufacturing.Thewarrantyperiod
isconsideredtostartonthedeliverydateoftheproduct.Ifadefect
inrawmaterialsoraproduconawisfound,thesellerisobligated,
whentheproductissenttothesellerwithoutdelayorbeforeexpira-
onofthewarranty,toamendthemistakeathis/herdiscreoneither
by repairing the defecve product or by delivering free of charge to
thebuyeranewawlessproductandsendingittothebuyer.Delivery
costsfortherepairunderwarrantywillbepaidbythebuyerandthe
return costs by the seller. The warranty does not comprise damages
causedbyaccident,lightning,oodorothernaturalphenomenon,nor-
malwearandtear,improperorcarelesshandling,abnormaluse,over-
loading,improperstorage,incorrectcareorreconstrucon,orchanges
and installaon worknotdonebytheseller.The seleconofmateri-
alsfordevicespronetocorrosionisthebuyer’sresponsibility,unless
otherwise is legally agreed upon. Should the manufacturer alter the
structureofthedevice,thesellerisnotobligatedtomakecomparable
changestodevicesalreadypurchased.Appealingforwarrantyrequires
thatthebuyerhascorrectlyfullledhis/herduesarisenfromthede-
liveryandstatedinthecontract.Thesellerwillgiveanewwarrantyfor
goodsthathavebeenreplacedorrepairedwithinthewarranty,how-
everonlytotheexpiraonoftheoriginalproduct’swarrantyme.The
warrantyincludestherepairofadefecvepartordevice,orifneeded,
anewpartordevice,butnotinstallaonorexchangecosts.Underno
circumstanceisthesellerliablefordamagescompensaonforindirect
damage.
INSTALLATION
D
600
IP 54
T
500
300
400
100
a
F
F
P
I
P
:
e
p
y
S
0
0
6
a
P
0
3
40
200
500
400
Pa
200
0
P.max.100 kPa
100
300
DPG500
Made in Finland
ZERO SET
Figure 1 - Mounting
1)Mountthedeviceinthedesiredlocaon.
Mounngposion:Tobeinstalledinhorizontalposion.
2)InstalltheDPG.
a.Adjustthezeropointbyturningthezerosetscrewontopofthelid.
b.Connectthepressuretubes.Connectposivepressuretoport
labeled“+”andnegavepressuretoport“-”.
WARRANTY POLICY
3)InstallthePS.
a.Openthelid.
b.Selectthedesiredswitchingpointbyturningtheseleconwheel.
c.Unscrewthestrainreliefandroutethecable.Connectthewiresas
showninFigure2.Tightenthestrainrelief.
d.Closethelid.
Figure 2 - Wiring diagram
NO
23 1
NC COM
P
RECYCLING/DISPOSAL
The parts le over from installaon should be
recycled according to your local instrucons.
Decommissioned devices should be taken to a
recyclingsitethatspecializesinelectronicwaste.
1/2