2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Hubbell Premise Wiring
  6. HWS775423

Hubbell Premise Wiring HWS775423 Installation guide

  • Hello! I've reviewed the Hubbell Light Duty Quadcab Instruction sheet. This document provides key details on various models including HEQ12, HEQ18, HEQ24, HEQ12S, HEQ18S, HEQ24S. It covers specifications like dimensions, mounting instructions for different wall types, and door assembly. I'm ready to help clarify any questions you might have about these quadcabs and their features.
  • What type of hardware is recommended for mounting to a wood stud wall?
    Can the door be mounted on either side?
    What size hardware should be used for mounting holes?
Rev.
Control No.
Hubbell Premise Wiring Instruction Sheet
®
Date:
Page of
HWS77542301 1 2
1 6/6/17
LIGHT DUTY QUADCAB INSTRUCTIONS
1
6
0
R
1
9
CATALOG
NUMBER DOOR RACK
UNITS HEIGHT WIDTH DEPTH
WALL
MNT
HEIGHT
HEQ12 MESH 5U 11.85 22 14 8.00
HEQ18 MESH 8U 17.10 22 14 13.25
HEQ24 MESH 12U 24.10 22 14 20.25
HEQ12S SOLID 5U 11.85 22 14 8.00
HEQ18S SOLID 8U 17.10 22 14 13.25
HEQ24S SOLID 12U 24.10 22 14 20.25
4567
DEPTH
HEIGHT
WIDTH
(4) FAN MOUNT
ACCEPTS REK (E) F
SOLD SEPERATELY
(4) .88" KNOCKOUT
(4) 3" KNOCKOUT
SIDE VENTILATION
ADJUSTABLE #12-24
TAPPED MOUNTING
RAILS:
EIA-310 19"
UNIVERSAL
MOUNTING
PRODUCT SPECIFICATIONS
1
Hubbell Premise Wiring, HUBBELL INCORPORATED (Delaware)
14 Lord's Hill Rd, Stonington CT 06378 (800) 626-0005, Fax (860) 535-8328
www.hubbell-premise.com
Control No. Page of
Rev. Date:
HWS77542301 2 2
1 6/6/17
Hubbell Premise Wiring, HUBBELL INCORPORATED (Delaware)
23 Clara Dr Suite 103 Mystic, CT 06355 (800) 626-0005, Fax (860) 535-8328
www.hubbell-premise.com
SIDE VENTILATION
MOUNTING INSTRUCTIONS
DO NOT USE DRYWALL SCREWS OR TOGGLE BOLTS!
Mounting holes are designed for 3/8" hardware, 16.00" on center for wood studded wall:
For masonry wall surface, the installer is responsible for specifying all of the appropriate
hardware.
MOUNTING TO A WOOD STUDDED WALL
Note: Wood studded wall mounting instructions apply to a 2" x 4" wood stud
wall with 3/4" plywood. Recommended hardware is (4) 3/8 x 2" long lag bolts
and (4) 1" O.D. flat washers (hardware not included)
2
16.0
WALL MNT HEIGHT
1.30
R.19
.62 1.25
R.38
3DOOR ASSEMBLY
567
2
1
Step 1: Engage stationary pin (1).
Step 2: Retract the spring pin (2) and align
with the hole in the frame.
Step 3: Release the spring pin.
Reversible: Door can be mounted on either side.
/