quadient IJ15K Connect Box Installation guide

Franking Machine

Installation Guide

IJ-15K

Table of Contents

IJ-15K Modem to Adapter PCB Conversion Instructions ............. 3

Connect Box IJ-15K Setup ................................................................... 7

IJ-15K Credit Procedure with new Adapter PCB .......................... 13

Page 1

IJ-15K Modem to Adapter PCB Conversion Instructions

Required Tools:

T10 Torque Screwdriver T20 Torque Screwdriver #1 Phillips Screwdriver

1. Power off the IJ-15K base

2. Open the Top Cover

Page 4

3. Remove the Top Cover (4 screws using a T10 Torque screwdriver)

4. Remove the Right Side Cover (2 screws in the rear using a T20 Torque screwdriver)

5. Remove the Right Side Plate (3 screws (2-rear/1-side) using a T20 Torque screwdriver)

6. Unplug the Modem PCB

7. Remove the Modem PCB (2 screws using a #1 Phillips screwdriver)

8. Install the new Adapter PCB (2 screws from the previous step using a #1 Phillips

screwdriver)

9. Plugin the new Adapter PCB

10. Install the Right Side Plate (3 screws (2-rear/1-side) using a T20 Torque screwdriver)

Page ϲ

11. Install the Right Side Cover (2 screws in the rear using a T20 Torque screwdriver)

12. Install the Top Cover (3 screws using a T10 Torque screwdriver)

13. Close the Top Cover

Classification: EXTERNAL

Connect Box: IJ-15K Setup

Author:

Jean Maurice Sanon

Valid from:

12-14-2022

Version No.:

V1.0

Page 7

Classification: EXTERNAL

Document name: Connect Box: IJ-15K Setup

Page ϴ

Change Control

Modification Notice

Author

Date

Version

Changes Highlight

Initial Document

Jean Maurice Sanon

12-14-2022

V1.0

Classification: EXTERNAL

Document name: Connect Box: IJ-15K Setup

Overview

Description

The Connect Box from Quadient provides our customers with expanded connection, communication, and security

options when configuring a Quadient Mailing System on their network. The Connect Box provides the ability to use

Wi-Fi to connect the IJ-15K to the customer’s network, as well as the ability to utilize TLS 1.2 encryption and

securing of data.

Upon connecting the Connect Box to the customer’s Wi-Fi network and properly configuring the Mailing System,

any communication originating from the Mailing System will use the Connect Box to transmit data over the

customer’s Wi-Fi network.

Configuring the Connect Box

1 Make a wireless connection to the Connect box

xPower up the Connect box using the power supply

xSSID format : A0124519XAASS1111

xClick connect to gain access

xSSID Wireless default password => Nconnect

2 Log in to the Connect Box

Open a Web Browser and enter https://192.168.123.1 press enter

Login: admin & Password: admin

Classification: EXTERNAL

Document name: Connect Box: IJ-15K Setup

Page ϭϬ

3 Setup Wireless connection

Select NETWORK then click on WIRELESS STATION. Select the appropriate SSID

Select the desired network and click Connect

Enter the password and click “Connect”

Click OK

to

validate

4 Adding the URLs

The URLs will need to be added to the Connect Box. To do so, navigate to the SETTINGS tab and click on

IJ/WJ and enter the URLs in the appropriate locations.

The On-Line Services (OLS) URL is: us-pc-prod-xj.link0-neopost.com

The Postal Core URL is: us-pc-prod-xj.link0-neopost.com

Classification: EXTERNAL

Document name: Connect Box: IJ-15K Setup

The URLs will also need to be added to the IS/IN/IX screen. It is also located under the SETTINGS tab.

Connect the IJ-15K to the connect Box

Connect the USB-A to the Connect Box and the USB-B to the IJ-15K adapter board

Classification: EXTERNAL

Document name: Connect Box: IJ-15K Setup

Page ϭϮ

Communication Diagrams

Wi-Fi Communication

Specifications

Connectivity

USB Cable (USB A / USB B)

Core System

CPU: NXP i.MX6UL @ 528MHz, ARM Cortex-A7, up to 1GB DDR3L

Power Specification

Power Connector 5.5 / 2.1mm barrel jack External Power Supply 5V DC +/-

5% 1,2A

Safety: UL/

CUL, CB, GS, CE, FCC

Wireless

Qualcomm Dual mode 802.11=> 2.4 Ghz FlexNotch Antenna

Wireless security

WEP, WPA\WPA2

This product is compliant with

EN55032/24. CE, FCC Part 15C, ID 2AKZA-QCA9377, IC 22364-QCA9377

IJ-15K Credit Procedure with new Adapter PCB

1. Main Menu

2. Select Postal Services [2]

3. Select Credit [1]

Page ϭϰ

4. Enter New Value (a whole dollar amount)

5. Confirm Amount, select OK

6. Credit INFO Please wait. . .

7. INFO Please wait. . .

8. INFO Modem initialization running. . .

9. INFO Modem Detection Step 1/3

Page 16

10. INFO Modem Detection Step 2/3

11. INFO Modem Detection Step 3/3

12. ERROR M254 No answer

13. ERROR M324 Device fails to connect

14. Wait 30 seconds then try again

Select Credit [1]

15. INFO Previous transaction failed

Page 18

16. INFO Please wait. . .

17. INFO Modem initialization running. . .

18. INFO Modem Detection Step 1/3

19. INFO Modem Detection Step 2/3

20. INFO Modem Detection Step 3/3

21. INFO connecting to server. . .

Page is loading ...

quadient IJ15K Connect Box Installation guide

quadient IJ15K Connect Box Installation guide

Related papers

Other documents