SUPPORT
SUPPORT
SUPPORT
SUPPORT
SUPPORT
SUPPORT
QUICK START GUIDE
BE3
SPECIFICATIONS
Wireless Version: v4.2
Wireless Profiles: Headset, Hands free, A2DP, AVRCP
Battery: 80mAh Lithium-Ion
Playtime: 5 Hours
Standby Time: 120 Hours
Charging Time: 2 hours
Charging Port: Micro USB
Operating Distance: 10m
PAIRING EARPHONES
CHARGING
Press and hold power button until blue light on earphone is
flashing rapidly.
On your smart device, Scan/search for available
Bluetooth devices.
Select BE3 to pair your earphones to your smart device.
Note: if prompted on your smart device to enter password
or pin, it is “0000”.
When successfully connected, your earphones light will
stop flashing and “Connected” will be announced
through earphones.
Plug in Micro USB cable into the charging power of the
earphones. Be sure to allow up to 2 hours to fully charge,
- Red light: Charging
- Blue Light on: Fully Charged
TURNING ON/OFF
Turning On: Press and hold power button for 3 seconds until
light indicator turns on. Holding for longer will
make earphones enter pairing mode.
Turning O: Press and hold power button until light indicator
turns o.
CONTROLS - DURING PHONE CALLCONTROLS - WHILE LISTENING TO MUSIC
CUSTOMER SUPPORT
Distributed by: Ayonz Pty Ltd
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Blaupunkt BPTWSB1 User manual
-
-
Urbanworx UXPIPCAM User manual
-
Urbanworx UXCS-15 User manual
-
-
-
Seiki SC-470AU9FDS User manual
-
Urbanworx UX5LWC121 User manual
-
Germanica GSC-50 User manual
-
Germanica GAF90LDual User manual
