Blaupunkt BPTWSB1 User manual

  • Hello! I've reviewed the instruction manual for the BLAUPUNKT BPTWSB1 true wireless ANC earphones. This document covers everything from initial setup and pairing to using the touch controls, various modes like ANC and Transparent mode, and charging instructions. I am familiar with its functions, specifications, and features, and ready to assist you with any questions you might have about these earphones and their operation.
  • How do I power on the earphones?
    How can I switch to ANC mode?
    How do I answer an incoming call?
    How many times the charging case can charge the earphones?
TRUE WIRELESS
ANC EARPHONES
BPTWSB1
INSTRUCTION MANUAL
Please read this manual carefully before
using, and keep it for future reference.
PRODUCT OVERVIEW
RIGHT EARPHONE
TOUCH CONTROL
SILICON
EARBUD
LEFT EARPHONE
WARNINGS
Read the below warnings thoroughly before you start using your earphones. Store this
Manual with product packaging. The safety precaution instructions reduce the risk of fire
or injury when correctly complied to.
To reduce the risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, or dispose of battery pack in fire.
• Do not allow metal objects to touch the battery on the device.
• Do not expose battery pack to excessive heat.
TOUCH CONTROL
SILICON
EARBUD
EARBUD
INDICATOR
EARBUD
INDICATOR
OPERATION INSTRUCTIONS
1. Power on/o
1) Take the earphones out of the charging case, automatically turn on;
Put the earphones back to the charging case, automatically turn o;
2) Long press 3 seconds to turn on. Long press 5 seconds to turn o.
2. Play/Pause music
When listening to music.
Tap left/right earphones once to play or pause the music.
3. Previous /Next Song
When listening to music.
Quick double tap left earphones to go to previous song.
Quick double tap right earphones to go to next song.
4. ANC Mode
When taking the earphones out of the charging case, it is regular Bluetooth mode.
Long press left or right earphones for 2 seconds to enter Transparent mode;
Long press left or right earphones for 2 seconds again to enter Noise reduction mode;
Long press left or right earphones for 2 seconds again to enter regular Bluetooth mode.
5. Answer/Hang up
When there is an incoming call.
Tap left or right earphones once to answer the call.
Tap left or right earphones again to end the call.
6. Reject
When there is an incoming call.
Quick double tap left or right earphones to reject the call.
7. Voice assistant
Quick tap left or right earphones 3 times to activate voice assistant.
PAIRING
1. Auto Pairing
Taking the earphones out of the charging case, and then the earphones will
automatically turn on, sync together and enter pairing mode.
2. Syncing your earphones
When earphones do not sync together or enter disconnected state during use.
1) Turn o both earphones and turn back on.
2) If that does not work, placing both earphones back into case, closing the charging
case and then open the charging case again.
3) While earphones is out of the charging case. Press and hold both earphones for 3
seconds. This will force the earphones to turn o and on again and sync with each
other.
3. Open up Bluetooth setting on your smart device and scan for BPTWSB1
CHARGING FUNCTION
1. Earphone charging
When battery is low, each 5s flash once Fully charge the case and earphones before using
for the first time.
2. Charging the charging case
(a) There is a Type-C cable included in the packaging. Connect it to the Type-C charging
port and the other end into a USB powered source to charge your case.
(b) chargingThe indicator light is whiteWhile 0< Charging box power <25%,led1
White light flashing;
(c) While 25%Charging box power <50%,led1 White light always on,led2 Flashing;
(d) While 50%Charging box power <75%,led1,led2 White light always on,led3 Flashing;
(e) While 75%Charging box power <90%,led1,led2,led3 White light always on,led4
Flashing;
(f) The charging box is fully charged 90-100%all led lights always on for left and right
side white light at the same time,you will listen to a warning sign or tone. It will turn o
when the earphones completely out of battery.
(a) Place the earphones into the charging case.
(b) White light on the earphones turn on when charging has begun. The light will turn o
when charging is complete.
SPECIFICATIONS
MODEL:
BLUETOOTH VERSION:
FREQUENCY RESPONSE:
SPEAKER SIZE:
SPEAKER IMPEDANCE:
MIC SENSITIVITY:
EFFECTIVE DISTANCE:
EARPHONES BATTERY CAPACITY:
CHARING CASE BATTERY CAPACITY:
PLAYING TIME:
TALK TIME:
EARPHONE CHARGING TIME:
CHARGING TIMES FOR THE HEADSET:
BPTWSB1
V5.3+BR+EDR+BLE
20HZ-20KHZ
10MM
32Ω±15% AT 1MW / 1000HZ
-38±1DB
15M (IN AN IDEAL ENVIRONMENT
WITHOUT ANY LARGE OBSTACLES)
3.7VDC 30mAh
3.7VDC 300mAh
4-5HOURS(HIGH QUALITY MUSIC AND
VOLUME MAY ACCELERATE BATTERY
CONSUMPTION)
4-5HOURS
ABOUT 1-2 HOUR
ABOUT 2.5 TIMES
PACKAGE CONTENTS:
1 X TRUE WIRELESS ANC EARPHONES
1 X TYPE C CABLE
2 X EARTIPS
1 X INSTRUCTION MANUAL
1 X WARRANTY CARD
CUSTOMER SUPPORT:
DISTRIBUTED BY:
Ayonz Pty Ltd
/