Urbanworx UXPIPCAM User manual

Type
User manual

Urbanworx UXPIPCAM is a smart camera that can be controlled via an app or Wi-Fi. It has a light sensor, microphone, lens, indicator, speaker, and a TF card slot. The camera supports TF cards from 8GB to 128GB, class 10 and above. It has a night vision mode that can be set to Auto, On, or Off. The camera also supports motion detection and will send notifications and save images to the app if any movement is detected. Additionally, you can use the app to speak through the camera to people you see in the video. The camera has a resolution of 1080p and can be used for both indoor and outdoor use.

Urbanworx UXPIPCAM is a smart camera that can be controlled via an app or Wi-Fi. It has a light sensor, microphone, lens, indicator, speaker, and a TF card slot. The camera supports TF cards from 8GB to 128GB, class 10 and above. It has a night vision mode that can be set to Auto, On, or Off. The camera also supports motion detection and will send notifications and save images to the app if any movement is detected. Additionally, you can use the app to speak through the camera to people you see in the video. The camera has a resolution of 1080p and can be used for both indoor and outdoor use.

INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future reference.
GENERAL SAFETY 4
PACKAGE LIST 6
PRODUCT OVERVIEW 7
POWER CONNECTIONS 8
INDICATOR 9
QUICK CONFIGURATION: 10
APP/WI-FI CONTROL 15
SPECIFICATIONS 18
SUPPORT Last Page
CONTENTS
4
GENERAL SAFETY
Read this manual thoroughly before you start using this
product Store this manual, the completed warranty card, your receipt and
the product packaging.
To reduce the risk of injury:
• Avoid rain, high temperature products or direct
exposure to sun.
• Do not expose this appliance to rain or moisture as it may
result in fire or an electric shock hazard
• Do not tamper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the
manufacturer.
• Please do not expose the product to splashing or
water contact
• Please do not place any object on top of the product
including objects filled with liquids such as vases.
IMPORTANT INFORMATION
PLEASE READ BEFORE USE:
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not
play with the appliance.
• Please do not use any other accessories which not supplied
with this product.
5
GENERAL SAFETY
• Do not attempt to open up and fix or modify circuits inside the unit.
• If the product is damaged, contact us at info@ayonz.com for advice.
If the product requires repair, contact us at info@ayonz.com;
never disassemble or modify the product or attempt to service
it yourself.
Run the USB Charging Line in such a way that there will be no risk of
anyone pulling it inadvertently or tripping over it.
The product is designed for indoor use in dry places only.
For safety reasons, always use earth connections.
Before installing the product, make sure to place it away from:
heatsources, radiators or other products that produce heat; areas with
high temperatures, high humidity or direct sunlight; excess dirt and
dust; open windows and any place where water may get to the unit.
Do not expose the electrical connections to water or other liquid.
Unpack the product and keep the original packaging carton and
materials in a safe place. It will help prevent any damage if the
product needs to be transported in the future, and you can use it to
store the product when it is not in use.
The product should always be repacked in its original packaging
whenever transporting to prevent any possible damage to the product.
When not in use: Disconnect from the power source and store in a cool,
dry and well ventilated location out of direct sunlight, and not subject
to humidity.
6
Smart camera X 1 User manual X1
Power cords X 1 Screw pack X 1 warranty card X 1
After opening the package, please make sure that the camera
host is intact and that the accessories are complete.
PACKAGE LIST
7
PRODUCT OVERVIEW
Light sensor Reset button
Speaker
MIC
TF card slot
Lens
Indicator
8
POWER CONNECTIONS
Connect the input port on the back of the camera and the
(5VDC 1A) USB output with the USB cable provided, when
the camera’s indicator light is on, it means the power is on.
9
INDICATOR
Red light is flashing constantly: camera is an anomaly or network
anomaly.
Red light is flashing slowly: camera is waiting to be connected to
the network.
Red light is flashing fast: the camera is connecting to the network.
Green light is flashing constantly: the camera network is connected
and operating normally.
Green light is flashing slowly: camera enters manual internet
connection mode.
Green light is flashing fast: the camera is connecting to the network.
Microphone: sound input to hear sound while viewing images.
SD card: supports TF cards from 8GB - 128GB, class 10 and above.
Reset key: long press for 5 seconds to reset the camera, restore
factory settings (the camera needs to modify the network
long press the reset key to restore factory settings) Short
press for nearly 1 second, the camera enters the manual
network mode, the red light flashes slowly.
10
Downloading Smart Life APP
Scan the QR code below to download and install the APP; or
search for Smart Lift in the App store or Google store to download
and install.
Tip: Using your mobile phone to connect to the Smart IP Camera
Wi-Fi (2.4GHz) requires a mobile phone system of Android 5.0
or iOS 8.0 and above.
QUICK CONFIGURATION:
11
Steps to add equipment to the network.
QUICK CONFIGURATION:
1. Click on the "Add Device"
button on the home page.
2. Select device type: Camera Lock,
Select product: Smart Camera (Wi-Fi)
12
QUICK CONFIGURATION:
3. To reset the device: power up
the device, press and hold the
“SET” button on the back of the
device and hear the beep “drop”
4.Select the wiring method in the
top right corner; this product
supports QR code and WIFI mode,
but not support cable.
13
QUICK CONFIGURATION:
5. Enter Wi-Fi information
for 2.4GHz networks with
Wi-Fi password
6. Scans the QR code until you
hear “Scan the QR code
successfully.
14
QUICK CONFIGURATION:
7. Wait for the device to
connect to the network until
you hear “device connected”.
8. After successful addition, click
“Done” to automatically enter
the device control screen.
15
APP/WI-FI CONTROL
PROFILE
HOME
VIEW ALL
CAMERAS
LIVE VIDEO
ADD PRODUCT
WEATHER
SELECT OR
ADD ROOMS
CLICK TO
ENTER PRODUCT
CONTROLS
SCHEDULES/
AUTOMATIONS
MAIN MENU/
HOME
MANAGEMENT/
NOTIFICATIONS
VOICE CONTROL
16
APP/WI-FI CONTROL
EDIT PROFILE
HOME MANAGEMENT
HERE YOU CAN CREATE,
SHARE AND ADD OTHER
USERS IN YOUR HOME TO
VIEW YOUR ADDED CAMERAS.
MESSAGE CENTRE
NOTIFICATIONS FOR ANY
MOVEMENT OR MOTION
DETECTED, AN IMAGE IS
CAPTURED AND SAVED INTO
THIS PAGE.
TO CONNECT AMAZON ALEXA
OR GOOGLE ASSISTANT
SETTINGS
Users name
17
APP/WI-FI CONTROL
Settings
Zoom
Mute/Unmute
Start recording,
this will save
to your smart
device storage
Press to speak
through camera to
person you can see
in the video.
Change to light mode
or Dark mode UI
Set night vision to
Auto, On or O
Notifications and
screen captures
of movements
detected.
Full Screen
Take Screenshot
Playback
recorded files
on inserted
SD Card
HD or SD
Quality
Back
Press to view
screenshots,
recordings.
Adjust motion
detection settings
18
SPECIFICATIONS
Wi-Fi 802.11b/g/n 2.4GHz
DC 5V 1A
-10° ~ +50°
66 (w) x 66 (d) x 105 (h) mm
INTERNET
POWER INPUT
UNIT DIMENSION:
WORKING TEMPERATURE
19
SPECIFICATIONS
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Urbanworx UXPIPCAM User manual

Type
User manual

Urbanworx UXPIPCAM is a smart camera that can be controlled via an app or Wi-Fi. It has a light sensor, microphone, lens, indicator, speaker, and a TF card slot. The camera supports TF cards from 8GB to 128GB, class 10 and above. It has a night vision mode that can be set to Auto, On, or Off. The camera also supports motion detection and will send notifications and save images to the app if any movement is detected. Additionally, you can use the app to speak through the camera to people you see in the video. The camera has a resolution of 1080p and can be used for both indoor and outdoor use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI