Blaupunkt BLL5MS User manual

Instruction Manual

5m RGB Wi-Fi LED Strip Light - BLL5MS

CONTENTS PAGE

General Safety Instructions 4

Product Overview 7

Controller 8

Adhesive Tape Installation 9

App / Wi-Fi Control 10

Download Blaupunkt Home app 11

Start Setup Process 12

Login/Create account 14

Adding Device 15

Blaupunkt App - Dashboard 20

Main Menu 21

Product Control Panel 22

Timer Settings 23

Schedule Settings 24

Home Management 25

Creating a Home 25

Adding Other Users to your Home 26

Add app to Google Home 30

Add app to Amazon Alexa Account 31

Cleaning Last Page

Speciﬁcations / Support Last Page

4

GENERAL SAFETY INSTRUCTIONS

Read this manual thoroughly before you start using this

product Store this manual, the completed warranty card, your

receipt and the product packaging.

• Do not tamper or change or modify the product in any way.

• Only use Accessories outlined and recommended by the

manufacturer.

• Please do not expose the product to splashing or

water contact

• Please do not place any object on top of the product

including objects ﬁlled with liquids such as vases.

IMPORTANT INFORMATION

5

GENERAL SAFETY INSTRUCTIONS GENERAL SAFETY INSTRUCTIONS

PLEASE READ BEFORE USE:

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety. Children should be supervised to ensure that

they do not play with the appliance.

• Please do not use any other accessories which not supplied

with this product.

• Do not attempt to open up and ﬁx or modify circuits inside

the unit.

• If the product is damaged, contact us at

info@ayonz.com for advice.

• If the product requires repair, contact us at

info@ayonz.com; never disassemble

or modify the product or attempt to service it yourself.

• Run the USB Charging Line in such a way that there will

be no risk of anyone pulling it inadvertently or tripping

over it.

6

• Before installing the product, make sure to place it away

from: heatsources, radiators or other products that produce

heat; areas with high temperatures.

• Do not expose the electrical connections to water or

other liquid.

• Unpack the product and keep the original packaging

carton and materials in a safe place. It will help prevent any

damage if the product needs to be transported in the

future, and you can use it to store the product when it is

not in use.

• The product should always be repacked in its original

packaging whenever transporting to prevent any possible

damage to the product.

• When not in use: Disconnect from the power source and

store in a cool, dry and well ventilated location out of direct

sunlight, and not subject to humidity.

GENERAL SAFETY INSTRUCTIONS

7

1. RGB WI-FI LED Strip Light

2. Mounting Clips and Screws

3. Controller (press to adjust).

4. Pre-installed Adhesive Tape - The back of the LED Strip

Light has a Blue adhesive tape that can be removed and

the LED Light placed in desired location.

PRODUCT OVERVIEW

8

PRODUCT OVERVIEW (CONT.)

SCENES (EFFECTS)

Press to change between 8 preset

eects and to turn the device OFF.

Connect to App from page 10 to gain

more functions and settings.

CONTROLLER

RESET

Press and hold for 5-10 seconds

to reset the device and to repair

disconnectivity issues.

9

INSTALLING RGB STRIP LIGHTPRODUCT OVERVIEW (CONT.)

This RGB STRIP Light has an ad-

hesive tape on the back of the unit

(5m length).

- You can peel this adhesive tape

o as you apply the back of the

RGB Strip Light onto a ﬂat

surface.

- Pressing ﬁrmly and holding for a

few seconds to ensure it sticks.

NOTE: Do not press too hard or hit LED Light side as you may

damaged the LED Lights.

ADHESIVE TAPE INSTALLATION

PLAN OUT YOUR INSTALLATION FIRST THEN REMOVE

ADHESIVE TAPE AND INSTALL.

ONCE ADHESIVE TAPE REMOVED - DO NOT KEEP REMOVING

AND REPLACING INTO DESIRED LOCATION MULTIPLE TIMES.

THIS WILL WEAKEN THE ADHESIVE AND CAUSE THE RGB

STRIP LIGHT TO FALL EASIER.

10

APP/Wi-Fi Control

Working with your mobile device, using your home Wi-Fi

network router to communicate with your product and

control it.

CONTROLLING THE BLAUPUNKT WI-FI PRODUCT REMOTELY IS

SIMPLE. YOU WILL NEED:

- Android smartphone or tablet, or an Apple iPhone or iPad

- Internet connection at your home

- Wi-Fi network router set up at home.

You must also have the Blaupunkt Technology App installed or

updated on your smartphone or mobile device. This app is

available from Google Play or Apple App Store.

PLEASE READ THROUGH THE FOLLOWING PAGES FOR

INSTRUCTIONS OF SETTING UP YOUR BLAUPUNKT PRODUCT.

11

APP/Wi-Fi Control APP/Wi-Fi Control (Cont.)

Make sure your product is powered

so you can start the setup process

to connect your product to the

Blaupunkt Technology App.

SCAN ME!

12

APP/Wi-Fi Control (Cont.)

In order to do this, make sure you have the Blaupunkt Technology

App installed or updated on your mobile device, your Wi-Fi router

is switched on and your mobile device connected to your home

Wi-Fi network.

On your mobile device, tap on the Blaupunkt Technology app (1).

It will open and take you to the Login Page (2).

1 2

13

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

Before you log in, please press SIGN UP and register your account

using an email address. (3 and 4).

3 4

14

APP/Wi-Fi Control (Cont.)

Once entered email address, tap GET VERIFICATION CODE and an

email will be sent your email address with a veriﬁcation code. Enter

this code.

Now you can enter a password for your account. Please remember

this password or write it down. (5)

5

15

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

1. Tap the plus ( + ) or ADD DEVICE to add your device. (6).

2. Select the product which in this case is:

STRIP LIGHTS (WI-FI). (7)

67

16

APP/Wi-Fi Control (Cont.)

IMPORTANT

Before you can control your product remotely, you must power

the product and if needed; reset the Wi-Fi module on the unit.

To do so please follow the below instructions:

1. Using the USB Cable, plug USB side of product into a USB

powered USB port such as USB power adaptor, laptop or PC.

3. Now that the product is powered, the Strip light LED will start

ﬂashing BLUE rapidly. On the Blaupunkt Home app select

“Conﬁrm the indicator is blinking or breathing rapidly” page,

tick the box indicated (8) NEXT PAGE and press next.

4. Select Wi-Fi network then enter in the password to

connect. (9) NEXT PAGE

Note: Make sure to ONLY select 2.4GHz

5GHz Wi-Fi Network will not work with this app.

REFER TO NEXT PAGE --->

17

APP/Wi-Fi Control (Cont.) APP/Wi-Fi Control (Cont.)

8 9

18

APP/Wi-Fi Control (Cont.)

Once Wi-Fi is entered, the screen animation will show

connection process. (10)

10

19

APP/Wi-Fi Control (Cont.)

Once Wi-Fi is entered, the screen animation will show

connection process. (10)

APP/Wi-Fi Control (Cont.)

Once completed, it will show your product is now added. click

DONE. Click on the device name and you can now start navigating

the controls of the app. (11)

11

20

APP/Wi-Fi Control (Cont.)

HOME DASHBOARD

HOME

MANAGEMENT

HOME

ADD PRODUCT

WEATHER

SELECT OR

ADD ROOMS CLICK TO

ENTER PRODUCT

CONTROL

SCHEDULES/

AUTOMATIONS

MAIN MENU/

HOME

MANAGEMENT/

NOTIFICATIONS

Page is loading ...

Blaupunkt BLL5MS User manual

Blaupunkt BLL5MS User manual

Related papers

Other documents