3D Cabin 3D ES WB U Operating instructions

Type
Operating instructions
SKU: 3D ES WB U BLACK
Echo Show 5 Wall Mount
Wall Bracket Stand : Black
(Upright)
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:
1 x Bracket
2 x Screws
2 x Raw Plugs
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power
cables, water pipes or anything that should not be damaged.
2. Hold the bracket in the location you want to install it, ensure the bracket is level.
3. Using a pen or pencil mark through the mounting screw holes onto the surface you want to
mount to.
4. If mounting to a solid wall use a 6mm drill bit to make the necessary holes as marked.
5. Place a yellow fixing raw plug in each hole.
6. Line up your bracket holes with the yellow raw plugs in the wall and using the screws provided,
screw the bracket to the wall, DO NOT OVER TIGHTEN.
7. Place your device into the wall mounted bracket.
Manufactured By Jabtek Ltd, CT18 8DF
  • Page 1 1

3D Cabin 3D ES WB U Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI