3D Cabin 3D PS5 DI WM3 3P Operating instructions

Type
Operating instructions

This manual is also suitable for

SKU: 3D PS5 DI WM3 3P
WHI
PlayStation 5 Wall Mount
Triple Support Any
Orientation
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:
3 x Bracket
(A,B,C)
5 x Screws
5 x Wall Plug
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power
cables, water pipes or anything that should not be damaged.
2. Using the Drilling template overleaf mark the locations for the holes to be drilled for the bottom
brackets A and B
3. Using a pen or pencil mark through the mounting screw holes onto the surface you want to
mount to.
4. If mounting to a solid wall use a 5.5mm drill bit to make the necessary holes as marked.
5. Place a Red fixing raw plug in each hole.
6. Line up your bracket holes with the Red raw plugs in the wall and using the screws provided,
screw the bracket to the wall, DO NOT OVER TIGHTEN Diagrams overleaf to show orientation of
brackets
7. Place your device into the brackets A and B and ensure snug fit and attach C onto the top of the
console in the centre ENSURE it is firmly in place before marking the hole to drill.
8. Use a 5.5mm drill bit and Red raw plug if necessary, again.
9. Your device is now ready to be plugged in!
Manufactured By Jabtek Ltd, CT18 8DF
  • Page 1 1
  • Page 2 2

3D Cabin 3D PS5 DI WM3 3P Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI