3D Cabin 3D FOIL 2 Operating instructions

  • I've reviewed the instructions for the 3D FOIL 4 Tin Foil Mount Bracket Holder, which includes details on the parts, installation process, and a discount code. I'm ready to assist with any questions you have regarding the installation of this product.
  • What size drill bit should I use for a solid wall?
    What is included in the package?
    Is there a discount code for future purchases?
SKU : 3D FOIL 4
Tin Foil Mount Bracket Holder
Organiser For Kitchen Cupboard
Storage
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:
2 x Bracket
Pieces
4 x Screws
4 x Raw Plugs
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power
cables, water pipes or anything that should not be damaged.
2. Hold the bracket in the location you want to install it, ensure the bracket is level and you can
still remove the boxes once installed with enough space above the bracket.
3. Using a pen or pencil mark through the mounting screw holes onto the surface you want to
mount to.
4. If mounting to a solid wall use a 6mm drill bit to make the necessary holes as marked.
5. Place a Red fixing raw plug in each hole.
6. Line up your bracket holes with the Red raw plugs in the wall and using the screws provided,
screw the bracket’s to the wall, DO NOT OVER TIGHTEN.
7. Place your boxes in the holder and your done!
Manufactured By Jabtek Ltd, CT18 8DF
/