2. 3D Cabin
  3. 3D PS4 WM 6

3D Cabin 3D PS4 WM 6 Operating instructions

  • Hello! I've reviewed the instructions for the 3D PS4 WM 6 wall brackets. This document provides guidance on how to safely install your new wall brackets with included screws and wall plugs, so you can mount the device. I'm ready to answer your questions about the installation process and the product itself.
  • What should I check before installing the bracket?
    What size drill bit should I use?
    What should I do with the bracket holes?
SKU : 3D PS4 WM 6 BLACK
PS4 wall brackets (2 in a
set Top/Bottom): BLACK
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:
2 x Brackets
4 x Screws
4 x Wall Plugs
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power
cables, water pipes or anything that should not be damaged.
2. Hold the bracket in the location you want to install it, ensure the bracket is level.
3. Using a pen or pencil mark through the mounting screw holes onto the surface you want to
mount to.
4. If mounting to a solid wall use a 6mm drill bit to make the necessary holes as marked.
5. Place a yellow fixing raw plug in each hole.
6. Line up your bracket holes with the yellow raw plugs in the wall and using the screws provided,
screw the bracket to the wall, DO NOT OVER TIGHTEN.
7. Place your device into the wall mounted bracket.
Manufactured By Jabtek Ltd, CT18 8DF
/