2. 3D Cabin
  3. 3D XSX HWM 3 UF

3D Cabin 3D XSX HWM 3 UF Operating instructions

  • Hello! I've reviewed the instructions for the 3DCabin Wall Mount XSX HWM 3 UF, designed for mounting an Xbox Series X console horizontally. This document describes installation process with detailed steps including marking drill locations , bracket assembly, and wall mounting. I am ready to answer your questions to help you with installation
  • What drill bit size should I use for solid walls?
    What is the distance between the top two mounting screws?
    How do I assemble the bracket?
    What should I avoid when installing?
SKU : 3D XSX HWM 3 UF
Xbox Series X Wall Mount
Wall Bracket Horizontal
UPWARD FACING
WWW.3DCABIN.CO.UK
3DCabin
@3DCabin
CONTENTS:
2 x Bracket
2 x Mini Screw
4 x Screws
4 x Wall Plug
GB : Contains small Parts Keep away from Children.
DE : Enthält Kleinteile Von Kindern fernhalten.
FR : Contient de petites pièces Tenir hors de portée
des enfants.
IT: Contiene piccole parti Tenere lontano dalla portata
dei bambini.
ES: Contiene piezas pequeñas Mantener alejado de
los niños.
Please consult a qualified person when installing.
Instructions & Offers
Inside!
INSTRUCTIONS:
1. Find a suitable location and check that there are no hazards in the chosen space, e.g. power cables,
water pipes or anything that should not be damaged by drilling holes
2. Firstly using a pen or pencil mark onto the wall where the two top mounting screws will be needed,
these should be 315mm apart and level. Then mark two further hole marks 135mm below each of these.
3. If mounting to a solid wall use a 6mm drill bit to make the four necessary holes as marked.
4. Place a wall fixing raw plug in each hole.
5. Now to the bracket, assemble the two bracket ends onto the front metal bar with the two smaller
screws as supplied.
6. Line up your bracket holes with the raw plugs in the wall and using the screws provided, screw the
bracket to the wall, DO NOT OVER TIGHTEN.
7. Place your device into the wall mounted bracket, now your ready to plug in your device.
Manufactured By Jabtek Ltd, CT18 8DF
/