Midmark 281 & 680 Side and Blood Draw Chairs Installation guide

Type
Installation guide
© 2017 Midmark Corp. | 60 Vista Drive Versailles, OH 45380 USA | 1-800-643-6275 | 1-937-526-3662 |
TP200 20-42-FO-00012 Rev A1 C2169
English - 1
midmark.com
Style A
003-1661-99
Blood Drawing Chair Drawer Setup Guide
Rev. AA2 9/20/17
To install drawer assembly...
A. Loosen adjustment knob.
B. Insert drawer post as shown.
C. Adjust drawer to desired height.
D. Tighten adjustment knob.
Applies to Models:
281 (-002, -004, -012 & -014)
Special Tools:
Phillips screwdriver (6” or longer)
Adjustment Knob
Attention:
Maximum weight capacity of the drawer is 20 lbs (9 kg).
TP200 20-42-FO-00012 Rev A1 C2169
English - 2
003-1661-99
© Midmark Corporation 2017
MA750800i
Step 1: Remove drawer.
To move the drawer assembly to opposite side of chair:
To Raise
Step 4: Rotate drawer top 180°.
Secure with four screws.
Step 5: Insert arm thru drawer top as shown.
Install two bumpers & eight washers.
Install two washers & two nuts.
Step 2: Remove two bumpers & eight washers.
Remove two nuts & two washers.
Remove arm assembly.
Step 3: Remove four screws & drawer top.
TP200 20-42-FO-00012 Rev A1 C2169
Français - 3
003-1661-99
© Midmark Corporation 2017
Midmark Corporation
60 Vista Drive
Versailles, OH 45380 USA
1-800-643-6275
+1-937-526-3662
www.midmark.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Midmark 281 & 680 Side and Blood Draw Chairs Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI