Danfoss SpeedUp - Gypsum fibre element User guide

Brand: Danfoss

Model: SpeedUp - Gypsum fibre element

Type: User guide

Danfoss SpeedUp - Gypsum fibre element is a versatile underfloor heating system designed for various flooring options like carpet, tiles, parquet, laminate, and synthetics. It's suitable for residential and commercial spaces, including living areas, hallways, attics, offices, and medical facilities. The system features a low construction height of 70mm, making it ideal for renovations and projects with limited space. With its excellent thermal conductivity, it ensures efficient and comfortable floor heating, contributing to energy savings.

Application sheet

SpeedUp

Carpet / tiles / parquet / laminate / synthetics

Gypsum bre element (Fermacell)

1 Carpet / tiles / parquet

2 Gypsum bre element (Fermacell) 20 mm

3 SpeedUp heat panel + FH composite pipe 30 mm

4 Support batten (30mm)

5 Heat insulation 20 mm

6 SpeedUp perimeter insulation

7 If necessary moisture barrier

Floor nish NA mm Carpet / tiles / parquet / laminate / synthetics

Construction height 70 mm Height excluding oor nish

Weight ~ 32 kg / m² Weight excluding oor nish

Thermal resistance R 1,43 m²K / W The minimum thermal resistance requirement of DIN EN 1264 is

fullled.

Thermal transmission coecient U 0,63 W / m²K If the architectural design species better thermal insulation, this

must be taken into account.

Design load ≤ 2,0 kN / m²

Point load (≥ 20 cm²) ≤ 1,5 kN Sum point load ≤ design load; please notice special heavy ob-

jects (aquaria etc.)

Impact subsonic noise reduction 14 dB Test value according to DIN ISO 140-8; applies to concrete slabs

thicker than 12 cm (DIN 4109: m’ > 276 kg/m²)

Application area

Residential spaces, hallways and attic spaces in residential buildings and hotel rooms.

Corresponds to categories A1, A2 and A3 of DIN 1055-3. Oce spaces, hallways in oce

buildings, medical oces, stations and spaces with human occupancy, and commercial

spaces with oor areas up to 50 m² in residential or oce buildings. Corresponds to

categories B1, D1 and D2 of DIN 1055-3.

Requirements & special features

A level, smooth and structurally sound surface is necessary for full surface contact with

the heating elements (elevated requirements according to DIN 18202 Table 3, row 4).

Structural sealing according to DIN 18195 must be placed beneath the oor panel in case

of structures facing the ground, and otherwise on the unnished oor. The R value must

be increased if the groundwater level is less than or equal to 5 m. A U value not exceed-

ing 0.5 W/m²K must be maintained in existing buildings and additions with areas up to

50 m². Observe all installation instructions and manufacturer’s instructions.

Additional insulation

20 mm EPS 035 DEO 200 kPa; existing buildings: 40 mm XPS 035 500 kPa; For more de-

tails please see Additional Insulation summary.

Construction

According to EnEV, EN 1264, DIN 1055, 18195 and 18202

Construction number 73

Technical Data Floors/ceilings facing unheated rooms or the ground

VA.CR.J1.02

Danfoss HES

Danfoss SpeedUp - Gypsum fibre element User guide

Danfoss SpeedUp - Gypsum fibre element User guide

Danfoss SpeedUp - Gypsum fibre element User guide

Related papers