2. American Standard
  3. 7196.011

American Standard 7196.011, 7196.813, 7196.814, 7196.815, Silhouette 7196.011 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard 7196.011 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
G21
© 2008 AS America Inc.
Revised 2/08
SILHOUETTE™ 38" DUAL LEVEL KITCHEN SINK
• Americast
®
brand engineered material
• Dual level double bowl design
• Titanium enamel - heat resistant up to 1000°
• Acid-resisting glossy porcelain nish
• Tile-edge installation
• Fits most standard 36" cabinet bases
• Silicone Sealant supplied
• Available in 1, 3, 4, or 5 faucet hole
conguration
• Customized hole punchings available
(see page G56)
Tile Edge:
❏ 7196.011 Center hole only
❏ 7196.813 3 hole
❏ 7196.814 4 hole
❏ 7196.815 5 hole
Nominal Dimensions:
965 x 559 x 241mm
(38" x 22" x 9-1/2")
Bowl sizes:
Right Hand: 318mm (12-1/2") wide
413mm (16-1/4") front to back
178mm (7") deep
Left Hand: 527mm (20-3/4") wide
476mm (18-3/4") front to back
229mm (9") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
®
SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS
* See faucet section for available models
To Be Specied:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Basket Strainer: 4331.013
❏ Soap Dispenser: 4503.115, (specify color):
❏ Traps:
Optional Accessories:
❏ Large Wood Cutting Board: 9000.250
❏ Small Wood Cutting Board: 9000.185
❏ Colander for Cutting Board: 8102.100, Color:
❏ Large Colander: 8103.100, Color:
❏ Web Cover: 8106.100, Color:
❏ Bottom Sink Rack (Left): 7407.100, Color:
G22
© 2008 AS America Inc.
7196.813/814/815
NOTES:
*
COUNTERTOP CUTOUT 933mm x 527mm x 25mm RADIUS
(36-3/4 X 20-3/4 WITH 1" RADIUS) AT CORNERS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL AND
COUNTERTOP SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ASME Standard A112.19.4
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided leaet.
SILHOUETTE™ 38"
DUAL LEVEL SINK
AMERICAST
®
3-1/2"
(89mm)
DIA.
2-1/8"
(54mm)
2" (51mm)
OPTIONAL
FINISHED WALL
OR SPLASHBACK
7-7/8"
(200mm)
8-1/8"
(206mm)
1-1/2"(38mm) DIA.
HOLES TYP.
C/L
3/16"
(5mm)
12-1/4"
(311mm)
11-1/8"
(283mm)
19"
(483mm)
38"
(965mm)
9-1/8"
(232mm)
5-3/4"
(146mm)
SEALING
COMPOUND
7-1/8"
(181mm)
36" (914mm)
SUGGESTED
FINISHED
FLOOR
TILED COUNTERTOP
(BY OTHERS)
22"
(559mm)
*CUTOUT NOTE
7196.814
4 HOLE
7196.815
5 HOLE
1-1/2" O.D. TAILPIECE
5-3/4"
(146mm)
4"(102mm)4"(102mm) 4"(102mm)
4"(102mm)
3/8"
(10mm)
Revised 2/08
/