Wall Mount Designed for Sonos Beam Soundbar
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-sonos2b
SKU: MOUNT-SONOS2B
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
A (x1)
Mount
B (x1)
Template
C (x6)
M5x40
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D (x2)
M5x10
E (x2)
Plastic Spacer
F (x6)
Anchor
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
G (x2)
M5 Washer
TOOLS NEEDED
Phillips
Screwdriver
Drill
Level
Pencil
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
Low Tack
Tape
3
ASSEMBLY STEPS
STEP 2
OPTION A: Wood Stud Installation
Use a stud finder to determine where Template (B) slots and wood studs overlap. Mark drilling locations
on wall. Drill 1.5” (38mm) deep holes using a 3/32” (2.5mm) drill bit. Attach Mount (A) to wall using
M5x40 Screws (C).
STEP 3
OPTION B: Concrete/Brick Installation
Use Template (B) to mark drilling locations on wall. Drill 6X 1.625” (41mm) deep holes using a 5/16”
(8mm) drill bit. Insert 6X Anchors (F) into wall. Attach Mount (A) to wall using 6X M5x40 Screws (C).
Secure Sonos Beam speaker to Mount (A) using M5x10
Screws (D), Plastic Spacers (E), and M5 Washers (G).
Make sure Plastic Spacers (E) are placed between Mount
(A) and Sonos Beam speaker as shown.
Optional: For added stability in drywall,
it is recommended to use at least two
additional Anchors (F) and M5x40 Screws
(C). Use Template (B) to mark additional
locations for drilling on wall. Drill 1.625”
(41mm) deep holes using a 5/16” (8mm)
drill bit. Insert Anchors (F) into wall.
STEP 1
Important: Template (B) is meant to represent the approximate height and width of the Mount (A) and
Sonos Beam speaker once installed. Use it to determine the location of the Sonos Beam speaker before
drilling holes. Keep 1” (25 mm) space minimum fro access to beams touch controls.
Fix Template (B) to wall in desired location using low tack
tape and level. If adjustment is needed, remove Template
(B) from wall and repeat process until a satisfactory
location is attained.
LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
/
