2. ITC
  3. 231
231

ITC 231 User manual

  • Hello! I've reviewed the installation instructions for the ITC 231 series Whisper Latch. This document outlines the necessary steps and safety precautions to ensure a successful installation. I'm ready to answer any questions you have about the process or the latch itself.
  • What size spade bit is needed for installation?
    Is a power drill required for installation?
    What should I do with the packing materials?
Whisper Latch Installation Insructions
(Part #’s: 231 series)
For warranty information please visit www.itc-us.com
1. Determine the installation location and drill a
1” hole using a spade bit. Mark the location for the
mounting screws and pre-drill. Insert the round
collar into the hole.
2. Push the round knob through the hole and attach
the latch assemby along with black shim to the
door using the screws provided.
4. Push the switch to ensure latch is in working order.
PARTS NEEDED:
Whisper Latch Assembly 1” Spade Bit
(not provided)
Power Drill
(not provided)
Whisper Latch Safety Instructions
IMPORTANT SAFETY INSTUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
*To avoid a hazard to children, account for all parts and destroy all packing materials.
3030 Coporate Grove Dr • Hudsonville • MI • 49426
Phone: 616-396-1355 • www.itc-us.com • [email protected] • DOC # 710-00205 • Rev A: 11/19/2021
3. Determine the installation location for the latch.
Mark the location and secure the latch via
screws.
/