Revision history Table of revisions
Date Changed Rev
March 2020 Changed TPSN to TPS5 and changed document number from AX00000314 0304
January 2020 Updated with new part options 0203
August 2019 Corrected part numbers 0202
April 2019 Added new options and corrected various part numbers 0201
November 2018 Add shaft option K 0103
May 2018 Added various new options 0102
March 2017 First edition 0101
Parts Manual
D1P size 130
2 |
©
Danfoss | March 2020 AX224986484951en-000304
General information
Service Parts Identification............................................................................................................................................................4
Nameplate...........................................................................................................................................................................................4
Date code............................................................................................................................................................................................ 5
About service bulletins...................................................................................................................................................................5
Procedure to identify a part..........................................................................................................................................................5
Adobe Acrobat 2-page viewing..................................................................................................................................................6
Order code.......................................................................................................................................................................................... 7
Controls
Control NPNN.....................................................................................................................................................................................8
Control NPSN...................................................................................................................................................................................10
Control TPS5.................................................................................................................................................................................... 12
Control NNES...................................................................................................................................................................................14
Control TPE5.................................................................................................................................................................................... 16
Control NPNR...................................................................................................................................................................................18
Input shaft
Shaft K (without impeller)...........................................................................................................................................................20
Shaft P-T (without impeller).......................................................................................................................................................22
Shaft P-T (with impeller)..............................................................................................................................................................24
Mounting flange
Mounting flange D4......................................................................................................................................................................26
Endcap
Endcap LN1...................................................................................................................................................................................... 28
Endcap 5RN1, RN1......................................................................................................................................................................... 30
Endcap 5RY1....................................................................................................................................................................................32
Endcap 5LY1.................................................................................................................................................................................... 34
Auxiliary mounting flange
Aux mounting A1, A2................................................................................................................................................................... 36
Aux mounting BA...........................................................................................................................................................................38
Aux mounting C5, D5................................................................................................................................................................... 40
Aux mounting D2...........................................................................................................................................................................42
Aux mounting NN..........................................................................................................................................................................44
Special hardware
Special hardware NNN (counterclockwise).......................................................................................................................... 46
Special hardware NNN (clockwise)..........................................................................................................................................48
Orifice NNN.......................................................................................................................................................................................50
Overhaul seal kit
D1P seal kit....................................................................................................................................................................................... 52
Service bulletin
SB-2020-008.....................................................................................................................................................................................53
Parts Manual
D1P size 130
Contents
©
Danfoss | March 2020 AX224986484951en-000304 | 3
Service Parts Identification
The following information and procedure is used to identify the module group, item number,
manufacture date, part number, and part name of the parts included in the D1P 130.
The parts listed include all parts which may be used when performing either “Minor Repairs”, “Major
Repairs” or “Conversions” on the .
Nameplate
Each unit will have a nameplate affixed to the housing. The nameplate will include the following
information:
Model Code
The Danfoss model code completely defines the specific unit and must be used when ordering parts to
service this product.
Model Number
The Danfoss model number is used by the factory in manufacturing. On repeat orders, a complete unit
can be ordered by the model number.
Serial Number
The Danfoss serial number is used to identify the manufacture date and the unit sequence in the build.
The serial number is also used to identify the units warranty time period.
The letter code indicates the location of original manufacture (assembly).
The first number (2 digits) indicates the year of manufacture. The second number (2 digits) indicates the
calendar week of manufacture.
The third number (5 digits) is a sequential number used to identify a specific unit.
Parts Manual
D1P size 130
General information
4 |
©
Danfoss | March 2020 AX224986484951en-000304
Date code
The date code is defined as the year and week of manufacture. The same item number may list more than
one part number. This indicates that there is more than one configuration for that item number. You will
see that there are different date codes for the different part numbers. Find the date code of your unit
from the nameplate to determine which service part number you need to order.
Example: The service part desired is item G30
Order Code Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
80 G30 89-17 8000243 End cap gasket 1
G30 89-16 8000151 End cap gasket
(SB-1995-006)
1
All units using this order code with a date code prior to 89-17 must use part number “8000151.” All units
with a date code of 89-17 and newer must use part number “8000243.”
About service bulletins
A Service Bulletin Number (SB-_ _ _ _ - _ _ _) may follow the “Part Name” of the part you desire. You must
read that Service Bulletin prior to ordering that part. The information contained in these Service Bulletins,
as of the print date of this bulletin, are included at the end of this manual. Service Bulletins contain more
detailed information such as interchangeability, what additional parts are involved, etc. It is suggested
that you add additional Service Bulletins to this manual as you receive them.
Procedure to identify a part
The modular design of this product results in a simplified service parts list and part number identification
procedure.
The same item numbers are used for same part names on all units within a product type. A part number
that has another number following it in parentheses is done to make this a world wide manual.
Parts Manual
D1P size 130
General information
©
Danfoss | March 2020 AX224986484951en-000304 | 5
Adobe Acrobat 2-page viewing
While viewing manual in Adobe Acrobat, the following settings need to be applied to ensure proper
page display.
1. Select “View” → “Page Display” → “Two Page View”
2. Select “View” → “Page Display” → “Show Cover Page in Two Page View”
Parts Manual
D1P size 130
General information
6 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code
D 1 P 1 3 0 R A T P S N T D 4 N 1 B 1 0 5 0 2 5 0 2 2 N N F S F S N N N NN N
Series
Product
type
Displacement
A B C D E F G H J K L M N P R S
Rotation
Product version
Control type
Input shaft
Endcap
Power control setting
Pressure compensated control setting
Load sensing control setting
Hydraulic disp control start pressure setting
Max displacement setting
Min displacement setting
Special hardware
Special feature
Parts Manual
D1P size 130
General information
©
Danfoss | March 2020 AX224986484951en-000304 | 7
D1P control NPNN
Parts configuration
D175
*D145
D160
D160
D103
*D350
D370
*D380
QD01
D900
A220
Generic end cap used to show part location only
* Included in overhaul seal kit Q210
Parts Manual
D1P size 130
Controls
8 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: NPNN
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 17-10 11187419 Bias piston 1
D103 17-10 11040532 Plug assembly 2
D145 17-10 11168710 Control seal 1
D160 17-10 11130807 Dowel pin 2
D175 17-10 527218 Screw 5
D350 17-10 9004104-1160 O-ring 1
D370 17-10 11167267 Screw 1
D380 17-10 612291 (9003508-0008) Hex nut seal 1
D900 17-10 11139781 Plug assembly 1
QD01 17-10 11196162 SVC control kit 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 9
D1P control NPSN
Parts configuration
D175
D103
D135
*D145
D160
D160
*D850
D870
*D880
*D380
D370
*D350
QD01
D900
A220
Generic end cap used to show part location only
* Included in overhaul seal kit Q210
Parts Manual
D1P size 130
Controls
10 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: NPSN
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 17-10 11187419 Bias piston 1
D103 17-10 11040532 Plug assembly 1
D135 17-10 11040532 Plug assembly 1
D145 17-10 11168710 Control seal 1
D160 17-10 11130807 Dowel pin 2
D175 17-10 527218 Screw 5
D350 17-10 9004104-1160 O-ring 1
D370 17-10 11171317 Screw 1
D380 17-10 9003509-0008 Hex nut seal 1
D850 17-10 9004104-1160 O-ring 1
D870 17-10 11171317 Screw 1
D880 17-10 9003509-0008 Hex nut seal 1
D900 17-10 11139781 Plug assembly 1
QD01 17-10 11196161 SVC control kit 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 11
D1P control TPS5
Parts configuration
* D150
* D480
* D002
QD01
D550
D175
* D540
* D492
D370
* D380
* D002
* D880
D870
* D862
* D140
D160
D125
D103
3x
D160
D470
D135
A220
Generic end cap used to show part location only
* Included in control seal kit QD210
Parts Manual
D1P size 130
Controls
12 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: TPS5
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 16-01 19-15 11128577 Bias piston 1
D125 16-01 19-15 11040532 Plug assembly 1
D135 16-01 19-15 11040532 Plug assembly 1
D140 16-01 19-15 9004104-1350 O-ring 1
D150 16-01 19-15 11131524 O-ring 3
D160 16-01 19-15 11130807 Pin 2
D175 16-01 19-15 527218 Screw 5
D002 16-01 19-15 9004104-1160 O-ring 2
D370 16-01 19-15 11171317 Screw 1
D380 16-01 19-15 9003509-0008 Lock nut seal 1
D470 16-01 19-15 11171317 Screw 1
D480 16-01 19-15 9003509-0008 Lock nut seal 1
D492 16-01 19-15 9004104-1160 O-ring 1
D540 16-01 19-15 9004104-0100 O-ring 1
D550 16-01 19-15 11130806 Retainer ring 1
D862 16-01 19-15 11171316 O-ring 1
D870 16-01 19-15 11171317 Screw 1
D880 16-01 19-15 9003509-0008 Hex nut seal 1
QD01 16-01 19-15 11160942 SVC control kit (SB-2020-008 on page 53) 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 13
D1P control NNES
Parts configuration
D705
D701
D700
D770
*D880
D870
*D850
*D210
*D190
*D120
D110
D175
D103
*D145
D160
D160
A220
QD02
*D902
QD01
Generic end cap used to show part location only
Parts Manual
D1P size 130
Controls
14 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: NNES
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 17-22 11187419 Bias piston 1
D103 17-22 11040532 Plug assembly 3
D110 17-22 11126005 Screw 1
D120 17-22 9003509-0006 Hex nut seal 1
D145 17-22 11168710 Control seal 1
D160 17-22 11130807 Dowel pin 2
D175 17-22 527218 Screw 5
D190 17-22 9004104-1200 O-ring 1
D210 17-22 11130945 O-ring 1
D700 17-22 11146859 Proportional solenoid valve assembly, 24v 1
D705 17-22 11155340 Cap 1
D770 17-22 11137994 Screw 4
D850 17-22 9004104-1160 O-ring 1
D870 17-22 11167267 Screw 1
D880 17-22 612291 (9003508-0008) Lock nut seal 1
D902 17-22 11135346 Ring seal 1
QD01 17-22 11196159 SVC control kit 1
QD02 17-22 11196160 SVC shuttle valve kit 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 15
D1P control TPE5
Parts configuration
* D902
* D145
* D380
* D350
* D190
* D120
* D540
D550
D110
D180
D170
D103
11x
* D210
D770
D701
D700
D705
D370
* D480
* D450
D470
QD01
A220
D160
D160
QD02
Generic end cap used to show part location only
* Included in overhaul seal kit Q210
Parts Manual
D1P size 130
Controls
16 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: TPE5
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 16-01 11169133 Bias piston 1
D103 16-01 11040532 Plug assembly 11
D110 16-01 11126005 Screw 1
D120 16-01 9003509-0006 Hex nut seal 1
D145 16-01 11168710 Seal 1
D160 16-01 11130807 Dowel pin 2
D170 16-01 11125762 Screw 3
D180 16-01 11128407 Screw 2
D190 16-01 9004104-1200 O-ring 1
D210 16-01 11130945 O-ring 1
D350 16-01 9004104-1160 O-ring 1
D370 16-01 11167267 Screw 1
D380 16-01 612291 (9003508-0008) Lock nut seal 1
D450 16-01 9004104-1160 O-ring 1
D470 16-01 11167267 Screw 1
D480 16-01 612291 (9003508-0008) Lock nut seal 1
D540 16-01 9004104-0100 O-ring 1
D550 16-01 11130806 Retainer ring 1
D700 16-01 11146859 Solenoid 1
D701 16-01 11189731 Coil assembly 1
D705 16-01 11155340 Solenoid cap 1
D770 16-01 11137994 Screw 4
D902 16-01 11135346 Seal 1
QD01 16-01 11182020 SVC control kit 1
QD02 16-01 11153191 SVC shuttle valve kit 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 17
D1P control NPNR
Parts configuration
QD01
D175
D103
D896
D135
*D145
D160
D160
*D850
D870
*D880
*D350
D370
*D380
D900
A220
* Included in overhaul seal kit Q210
Generic end cap used to show part location only.
Parts Manual
D1P size 130
Controls
18 |
©
Danfoss | March 2020 AX224986484951en-000304
Order code: NPNR
Item Date Begin Date End Part Number Part Name Qty. per
Model/Kit
A220 18-32 11187419 Bias piston 1
D103 18-32 11040532 Plug assembly 4
D135 18-32 11040532 Plug assembly 1
D145 18-32 11168710 Control seal 1
D160 18-32 11130807 Dowel pin 2
D175 18-32 527218 Screw 5
D350 18-32 9004104-1160 O-ring 1
D370 18-32 11167267 Screw 1
D380 18-32 612291 (9003508-0008) Lock nut seal 1
D850 18-32 9004104-1160 O-ring 1
D870 18-32 11167267 Screw 1
D880 18-32 612291 (9003508-0008) Lock nut seal 1
D896 18-32 Plug assembly Plug assembly 1
D900 18-32 11139781 Plug assembly 1
QD01 18-32 11221674 Control SVC kit 1
Parts Manual
D1P size 130
Controls
©
Danfoss | March 2020 AX224986484951en-000304 | 19
D1P input shaft K (without impeller)
Parts configuration
QE01
E120
E110
E100
E130
Generic housing used to show part location only.
Parts Manual
D1P size 130
Input shaft
20 |
©
Danfoss | March 2020 AX224986484951en-000304
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
