AccuBANKER D450 Australian Operating instructions

Hello! I have analyzed the provided user manual for the D450 software upgrade process. This document includes detailed steps on how to perform a software upgrade for your device, from connecting the unit to the PC to loading the currency and uploading the new firmware. I am ready to answer any questions you might have about this procedure or the device itself.
How do I connect my device to the PC?

What is the next step after connecting the cable?

What is the purpose of the 'Connect' button?

What is the next step after successful connection?

What should I do after the download is complete?

D450 Software

upgrade procedure

2- Turn the unit ON.

3- Open the Software upgrade application.

"D450-Download Tool 0.2"

4- Press "Connect" button, then the unit will beep to

confirm the connection.

1- With the unit turned OFF connect the

upgrade cable to the PC.

D450 Software

upgrade procedure

5- Press "Manage Mapping" button.

6-Press "Load Currency" and open the Firmware within the

ADP_File, then press "Open"

9-Turn the unit OFF and disconnect the upgrade cable.

Finally turn the unit ON and test the programming

8-When the download is complete press "Close" button.

7-Press "Upload to D450". The firmware will start downloading.

Go to the "Software Update Tool" file and

download it, then save, open and unzip the file

on your computer. NOTE: If you don't have

WinRAr or WinZip softwares installed you can

download it from this link for free.

https://www.win-rar.com/download.html?&L=0

D450

Software upgrade procedure