MOVEAUDIO S180
USER MANUAL
V1.0 | TW18
4
Chapter 2. Make connections
Enjoy music and hands-free calling with your earbuds by using the Bluetooth function of your
device.
Connect with a Bluetooth device
Pair your Bluetooth device to use it with the earbuds for the first time. Before you make the
pairing operation, make sure your earbuds and the charging case are charged sufficiently.
To pair the earbuds with your device for the first time after purchase or after resetting the
earbuds, follow these steps:
1. Open the charging case, and keep it next to your device. The earbud LED indicators flash in
blinking blue.
2. Unlock your device, and turn on the Bluetooth function on your device.
3. Select TCL MOVEAUDIO S180 from the list of available devices to complete the
connection.
90%
TCL MOVEAUDIO S180
NOTES
• When you pair the earbuds with a device for the first time after purchase or after
resetting the earbuds, the earbuds enter pairing mode automatically if you open the
charging case.
• If pairing is not established within 5 minutes, the pairing mode will be cancelled and
the earbuds will turn off.
To pair the earbuds with your device manually, follow these steps:
1. Remove both earbuds from the charging case, and wear the earbuds.
2. Triple-press either earbud, and hold the third press for about 2 seconds.
3. Unlock your device, and turn on the Bluetooth function on your device.
4. Select TCL MOVEAUDIO S180 from the list of available devices to complete the
connection.
5
L/RL/R
x2 +2s
90%
TCL MOVEAUDIO S180
NOTE
If pairing is not established within 5 minutes, the pairing mode will be cancelled and
the earbuds will turn off.
Disconnect from a Bluetooth device
Disconnect your earbuds from the Bluetooth device using these methods:
• Put both earbuds in the charging case, and close the case.
• Turn off the Bluetooth function on your device.
• Go to the Bluetooth setting on your device, tap your earbuds from the device list, and select
disconnection option.
NOTE: The disconnection procedure may vary depending on your device model.
Reconnect with your devices
After successful pairing, the earbuds will automatically connect to the last paired device if taken
out of the charging case.
NOTES
• The earbuds and Bluetooth device must be turned on and within connection range.
• If the earbuds cannot find and connect to the last paired device, they will enter
pairing mode after 15 seconds.
6
Chapter 3. Use your earbuds
Tap or press the touch control area on the earbuds to control your music, phone calls, and other
useful functions without getting out your phone.
Music feature
You can perform the playback controls by tapping and holding your right earbud.
R
x2
3s
Double tap Play or pause
Press and hold for 3 seconds Next song
Call feature
Phone controls
Manage calls by tapping and holding either of your earbuds.
L/R
x2
3s
Double tap Answer or end a call
Press and hold for 3 seconds • Reject an incoming call
• Mute or unmute your microphone during phone call
Call waiting
If you receive an incoming call while on a call, you can use either earbud to perform the
following operations.
7
x 2
3s
L/R
Double tap Answer the incoming call and place the current call on hold
Press and hold for 3 seconds Reject the incoming call and stay on the current call
Noise control feature
The noise cancelling control function is assigned to your left earbud by default. Press and
hold your left earbud for 3 seconds to switch between Active Noise Cancellation (ANC),
Transparency and OFF modes.
ANC mode reduces external sounds. With this mode activated, you can enjoy music or phone
calls without being disturbed by ambient noise.
Transparency mode lets external sounds in, so you can hear what's going on around you.
OFF mode turns off both ANC and Transparency modes.
L
3s
L
3s
L
3s
ANC ON ANC OFFTRANSPARENCY
MODE
NOTE
To save battery, disable the noise cancelling control function when not in use.
8
Voice assist feature
Activate the voice assistant on your device by double tapping the left earbud.
L
x2
Bixby / Siri® /
Google Assistant
TM
Restart the earbuds
If you encounter connection or pairing issues when using your earbuds, try restarting them by
following these steps:
1. Put both earbuds in the charging case, and close the case.
2. Wait for more than 2 minutes.
3. Take your earbuds out of the case. The earbuds have been restarted.
NOTE
The pairing information is retained even if the earbuds are restarted. The earbuds will
automatically connect to the last paired device if taken out of the case.
Reset the earbuds
If connection or pairing issues persist after the earbuds are restarted, try resetting your earbuds
by following these steps:
1. Tap both earbuds 4 times at the same time.
2. The earbud LED indicators flash in solid blue when the earbuds enter reset process.
x4
RL RL
NOTE
All pairing information is deleted when the earbuds are reset to factory settings. After
reset process, the earbuds will enter pairing mode automatically.
17
© 2021 TCL Communication Ltd. All rights reserved.
Trademarks
TCL and the TCL logo are trademarks of TCL Communication Ltd. The Bluetooth® word mark
and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by TCL Communication Ltd. is under license. USB Type-C™ is a trademark of USB Implementers
Forum. Google Assistant word mark and logo are trademarks or registered trademarks of Google
Inc. Siri is a trademark or registered trademark of Apple Inc. registered in the U.S. and other
countries. Comply is a registered trademark of Hearing Components, Inc. All other trademarks
and trade names are the property of their respective owners.
/
