Qro Classics Wireless Earbuds User manual

Brand
Qro
Model
Classics Wireless Earbuds
Type
User manual
User Instructions
www.qrostore.com
qrostore.us
www.qrostore.com
U.S. Service Hotline: 1 (800) 760-1688
Email: [email protected]
Chicago, IL
Contents in the Box
Product Features
Active Noise Cancellation (ANC)
Transparency Mode
Game (Entertainment) Mode
Call Noise Cancellation (ENC)
Music Play Time (ANC Off): 6H
Music Play Time (ANC On): 5H
Charging Port: USB-C
Charging Time (Earbuds): 1H
Charging Time (Charging Case): 1.5H
Standby Time: 150H
Bluetooth Version: 5.1
Water Resistance: IPX4
Earbuds (2) Charging
Case (1)
Ear Tips (4) USB-C
Charging
Cable (1)
User
Instructions
(1)
1
Warning
Dispose of earbuds
in accordance with
country and local
regulations.
Keep earbuds away
from young children
and animals.
User Instructions
www.qrostore.com
qrostore.us
S
L
Model Name: Classics
Powering On and Off
Powering On Options:
1. The earbuds will turn on automatically when the
earbuds are in the case and the case is opened.
2. Press and hold one earbud for 8 sec. You will
hear “Power On” when it turns on. Follow the
same procedure to turn on the other earbud.
Powering Off Options:
1. Place the earbuds back into the charging case
and close the lid.
2. The earbuds will automatically shut down if they
are not connected to a device for more than 3
minutes.
3. Press and hold one earbud for 8 sec. You will
hear “Power Off” before both earbuds turn off.
2
Wearing Your Earbuds
1. Identify the left and
right unit.
2. Try different wearing
position until they fit
your ears.
Pairing, Connecting to and Disconnecting from Devices
1. The earbuds will automatically pair with each other once turned on.*
2. Connecting to your device: Choose "QRO Classics" from the device
list in your device's Bluetooth settings.
3. Disconnecting from your device:
a) When they are placed into the charging case and the lid is closed; or
b) When the earbuds stray from their Bluetooth coverage range (10
meters) You will hear "Disconnected".
4. Reconnecting to your device:
a) The earbuds will reconnect to your device when they return to the
coverage area within 3 minutes.
b) When they are powered off, reconnect one erabud to a device by
pressing and holding the touch panel for 8 sec. You will hear “Power
On" and "Connected". Follow the same procedure to power on and
reconnet the other earbud.
The earbuds will automatically reconnect to the last device they were
connected to within that device's Bluetooth range.
*Earbuds can only be connected to one device at a time. If you are
experiencing Bluetooth pairing issues, make sure earbuds are not
connected to another device. 3
L R
Settings Bluetooth
QRO Classics
Connected
MY DEVICES
Bluetooth
Music & Call Touch Controls
Left
Earbud
Right
Earbud
1 Tap............Play/Pause
2 Taps ..........Previous Song/Take
and Hang Up Calls
3 Taps ..........Voice Assistant
....................(Siri, Bixby, etc.)
Press & Hold
1.5 Sec ........Decrease Volume/
....................Reject Calls
1 Tap............Play/Pause
2 Taps ..........Next Song/Take
and Hang Up Calls
3 Taps ..........
A
NC/Transparency/
....................Music/Game
....................(Entertainment)
Press & Hold
1.5 Sec ........Increase Volume/
....................Reject Calls
4
A sound effect can be heard
when touching the earbud touch-control panels
Re-pairing Two Earbuds
If the earbuds are powered on normally but only one earbud can be
heard, follow the procedures below to re-pair the two earbuds:
1. Delete or “Forget” the earbuds from your device's Bluetooth menu.
2. Place the earbuds back in the charging case and close the lid.
3. Take the earbuds out of the case for 15 seconds.
4. Reconnect to the device following the instructions above.
Listening Modes
-
Music mode: Increases battery life by turning off other listening modes.
- ANC mode: Blocks external noise.
- Transparency mode: Amplifies external noise to hear what is going
on in your surrounding environment.
- Game (Entertainment) mode: Eliminates delay between visual content
and corresponding audio (ANC automatically turns off).
1 Tap............Play/Pause
2 Taps ..........Next Song/Take
and Hang Up Calls
3 Taps ..........
A
NC/Transparency/
....................Music/Game
....................(Entertainment)
Press & Hold
1.5 Sec ........Increase Volume/
....................Reject Calls
5
Charging the Earbuds
1. Place the earbuds in the charging case and close the case. The
LEDs on the charging case will turn on. When the earbud battery
charge reaches 100%, the LEDs will turn off.
2. Earbud Low Power Warning: "Battery Low" recording will be heard
every 30 seconds when the voltage is lower than 3.3V.
3. Earbuds will take 1 hour to charge from 0 to 100%.
Charging
Charging the Charging Case:
1. Use the included USB-C cable to charge your charging case.
2. Charging case battery level indicator:
• 3 LED lights on (3 solid): 100% fully charged;
• 3 LED lights on (2 solid, 1 flashing): Between 70%-100%;
• 2 LED lights on (1 solid, 1 flashing): Between 30%-70%;
• 1 LED light on (1 flashing): Less than 30%.
3. Case will take 1.5 hours to charge from 0 to 100%.
Charging (Continued)
Earbuds and Charging Case Maintenance: Charge the earbuds and
charging case once every three months to maximize the life of both
devices. Failing to do so may result in damaging of the device.
6
Charging case
Charging
indicator
Type-C charging port
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Qro Classics Wireless Earbuds User manual

Brand
Qro
Model
Classics Wireless Earbuds
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents