Savant SKL-4000-00, the Keypad Link, effortlessly connects up to 40 Savant keypads to any Savant SmartLighting controller with available RS-422 ports. It ensures reliable communication between keypads and the controller, enabling seamless control of your Savant smart lighting system. Multiple SKL-4000 units can be linked together to accommodate larger systems, with a maximum of 256 keypads supported.
Savant SKL-4000-00, the Keypad Link, effortlessly connects up to 40 Savant keypads to any Savant SmartLighting controller with available RS-422 ports. It ensures reliable communication between keypads and the controller, enabling seamless control of your Savant smart lighting system. Multiple SKL-4000 units can be linked together to accommodate larger systems, with a maximum of 256 keypads supported.
The Savant® Keypad Link (SKL-4000) Quick Reference Guide provides the information
necessary to install the SKL-4000. Each SKL-4000 connects up to 40 Savant keypads to any
Savant SmartLighting controller with available RS-422 ports. Do not put more than 20 stations
on a single homerun. Several homeruns are preferable to one long homerun and can easily be
tied together at the controller. A total of 256 keypads may be connected to a Savant
SmartLighting controller through multiple SKL-4000s. Double ganged keypads are considered
two keypads.
Box Contents
(1) SKL-4000
(1) Quick Reference Guide (this document)
Required System Components
Savant controller with an allocated RS-422 connector
•
SSL-P002
•
SSL-P018
Savant Keypads: Up to 40 supported per SKL-4000
Station Bus Cabling
•
100 ft/30.48 meters (CBL-4100)
•
250 ft/76.20 meters (CBL-4250)
•
500 ft/152.40 meters (CBL-4500)
•
1000 ft/304.8 meters (CBL-41000)
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Dimensions and Weight
Dimensions and Weight
Height
12.17 in/309.07 mm
Width
15.48 in/393.19 mm
Depth
2.71 in/68.81 mm (depth into wall without front panel)
Depth
2.81 in/71.37 mm (overall depth with front panel attached)
Weight
8.75lb/3.97kg
Power
Power
Input
120-240V AC, 50/60 Hz
Power Supply Output to
Station Bus
16 - 24V DC
Power Supply Output to
Station Bus
120 watts 5 Amps
Cable
Cable
Keypad/station
16 AWG (recommended) 1000 ft (300 meters), cumulative
Keypad/station
18 AWG 330 ft (100 meters), cumulative
Compliance
Compliance
Safety and Emissions
FCC Part 15 | UL | CE Mark | C-Tick
RoHS
Compliant
)5217
723
6,'(
(&2
72''5
(&2
5(9
&5($725
(&2
'$7(
'(6&5,37,21
6$9$176<67(06//&
35235,(7$5<
&21),'(17,$/
0$7(5,$/
),1,6+
7,7/(
6,=(
81,76
':*12
5(9
6&$/(
6+((7
7+,6'2&80(17
&217$,16&203$1<
35235,(7$5<
,1)250$7,21$1',6
12772%(
5(352'8&('25
',675,%87('
:,7+28735,25
$87+25,=$7,21
3(56(9(5$1&(:$<
+<$11,60$
1$
1$
287/,1('5$:,1*6./
2)
,1&+
%
72/(5$1&('$7$7$%/(
81/(6627+(5:,6(63(&,),('
00
,1
;
;;
;;;
;;;;
$6127('
$6127('
$1*/(
72548(
'(*
6&5(:72548('$7$
6,=(,7(0
72548(9$/8(
)5217
723
6,'(
(&2
72''5
(&2
5(9
&5($725
(&2
'$7(
'(6&5,37,21
6$9$176<67(06//&
35235,(7$5<
&21),'(17,$/
0$7(5,$/
),1,6+
7,7/(
6,=(
81,76
':*12
5(9
6&$/(
6+((7
7+,6'2&80(17
&217$,16&203$1<
35235,(7$5<
,1)250$7,21$1',6
12772%(
5(352'8&('25
',675,%87('
:,7+28735,25
$87+25,=$7,21
3(56(9(5$1&(:$<
+<$11,60$
1$
1$
287/,1('5$:,1*6./
2)
,1&+
%
72/(5$1&('$7$7$%/(
81/(6627+(5:,6(63(&,),('
00
,1
;
;;
;;;
;;;;
$6127('
$6127('
$1*/(
72548(
'(*
6&5(:72548('$7$
6,=(,7(0
72548(9$/8(
)5217
723
6,'(
(&2
72''5
(&2
5(9
&5($725
(&2
'$7(
'(6&5,37,21
6$9$176<67(06//&
35235,(7$5<
&21),'(17,$/
0$7(5,$/
),1,6+
7,7/(
6,=(
81,76
':*12
5(9
6&$/(
6+((7
7+,6'2&80(17
&217$,16&203$1<
35235,(7$5<
,1)250$7,21$1',6
12772%(
5(352'8&('25
',675,%87('
:,7+28735,25
$87+25,=$7,21
3(56(9(5$1&(:$<
+<$11,60$
1$
1$
287/,1('5$:,1*6./
2)
,1&+
%
72/(5$1&('$7$7$%/(
81/(6627+(5:,6(63(&,),('
00
,1
;
;;
;;;
;;;;
$6127('
$6127('
$1*/(
72548(
'(*
6&5(:72548('$7$
6,=(,7(0
72548(9$/8(
Front View with Vents
Important
Front cover needs to be installed when SKL-4000 is operational.
2 3
5 6
4
1
SKL-4000 Interior Panel
1
RS-422 In
Port Type: RJ-45
Connects to Savant SmartLighting Controller: SSL-P002 or SSL-P018
Port Type: RJ-45
Connects to Savant SmartLighting Controller: SSL-P002 or SSL-P018
2
RS-422 Out
Port Type: RJ-45
Connects to additional SKL-4000s
Port Type: RJ-45
Connects to additional SKL-4000s
3
LEDs
Status
RED flashing indicates station bus (data) to or
from keypads.
Solid RED indicates overload.
Off indicates no data traffic.
3
LEDs
RX
RED flashing indicates serial traffic.
Solid RED indicates overload.
Off indicates no serial traffic.
3
LEDs
TX
Red flashing indicates station bus (data) to or
from keypads.
Solid RED indicates overload.
Off indicates no data traffic.
3
LEDs
PWR
GREEN indicates power is connected.
Off indicates power has been disconnected.
4
Address Dial
Settings range from 0-F to support up to eight SKL-4000 units.
Settings range from 0-F to support up to eight SKL-4000 units.
5
Connectors
1 - 4
3-pin, screw-type, removable plug-in connectors used to connect to
station (keypad) bus
3-pin, screw-type, removable plug-in connectors used to connect to
station (keypad) bus
6
STATION
ADDRESS
Information labels to identify location of keypads and zones.
Information labels to identify location of keypads and zones.
Savant Keypad Link
(SKL-4000)
Quick Reference Guide
009-0670-00
SKL-4000-00
101912
Copyright © 2012 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
SKL-4000 Interior Panel with Station Bus and Module cabling
SKL-4000 showing high voltage cabling
Wiring the Savant Keypads to the Savant Keypad Link
To connect the keypads to the SKL-4000, the wires from the 3-pin connectors must be spliced
with the 3-wire cable running to the keypad backboxes. The next figure shows the use of 16-
gauge (AWG) wire, but in shorter installations (up to 330 feet) 18-gauge wire can be used. Crimp
connectors or wire nuts can be used to terminate the stranded wire. Crimp connectors are
preferred.
Control Station Backbox Control Station Backbox Control Station Backbox
3 PIN
CONNECTOR
3 PIN
CONNECTOR
LiteTouch Control Station Wire
5 ea. 18 ga. Wires
White Spare Wire 16 ga.
Spare Wire
Blue 16 ga. (D)
Black 16 ga. (–)
Red 16 ga. (
+)
18 ga. Blue Connector
18 ga. Red Connector
Twist pair together for
connection to black
ground connector
NOTE: Voltage readings at this end should typically
read 1 or 2 volts less than at the CCU end.
Use crimp
connectors or
wirenuts.
(Crimp connectors are preferred.)
Keep the control station in its protective plastic bag until all construction work is completed.
Control Station Backbox Control Station Backbox Control Station Backbox
3 PIN
CONNECTOR
3 PIN
CONNECTOR
LiteTouch Control Station Wire
5 ea. 18 ga. Wires
White Spare Wire 16 ga.
Spare Wire
Blue 16 ga. (D)
Black 16 ga. (–)
Red 16 ga. (
+)
18 ga. Blue Connector
18 ga. Red Connector
Twist pair together for
connection to black
ground connector
NOTE: Voltage readings at this end should typically
read 1 or 2 volts less than at the CCU end.
Use crimp
connectors or
wirenuts.
(Crimp connectors are preferred.)
Keep the control station in its protective plastic bag until all construction work is completed.
Savant SmartLighting Station Bus Wire for Keypad Connection
Control Station Backbox Control Station Backbox Control Station Backbox
3 PIN
CONNECTOR
3 PIN
CONNECTOR
LiteTouch Control Station Wire
5 ea. 18 ga. Wires
White Spare Wire 16 ga.
Spare Wire
Blue 16 ga. (D)
Black 16 ga. (–)
Red 16 ga. (
+)
18 ga. Blue Connector
18 ga. Red Connector
Twist pair together for
connection to black
ground connector
NOTE: Voltage readings at this end should typically
read 1 or 2 volts less than at the CCU end.
Use crimp
connectors or
wirenuts.
(Crimp connectors are preferred.)
Keep the control station in its protective plastic bag until all construction work is completed.
Control Station Backbox Control Station Backbox Control Station Backbox
3 PIN
CONNECTOR
3 PIN
CONNECTOR
LiteTouch Control Station Wire
5 ea. 18 ga. Wires
White Spare Wire 16 ga.
Spare Wire
Blue 16 ga. (D)
Black 16 ga. (–)
Red 16 ga. (
+)
18 ga. Blue Connector
18 ga. Red Connector
Twist pair together for
connection to black
ground connector
NOTE: Voltage readings at this end should typically
read 1 or 2 volts less than at the CCU end.
Use crimp
connectors or
wirenuts.
(Crimp connectors are preferred.)
Keep the control station in its protective plastic bag until all construction work is completed.
Keypad Backbox
Note: Voltage readings at the end closest to the 3-pin connector should typically read no more
than 1 or 2 volts less than at the Savant Keypad Link end.
Keypad backboxes should have a minimum inside dimension of 3 in. high x 1⅞ in. wide x 1½ in
deep. Use a square-cornered backbox to best accommodate these dimensions. Do not use
plastic rings with rounded corners—keypads, especially multiple-gang keypads, will not fit.
Single-gang, metal cut-in boxes, plaster, or tile rings are not acceptable.
In new construction installations, for example, a single gang backbox, model P-241 (supplied by
Allied Moulded Products) would accommodate a Savant keypad. An example of a double gang
backbox is model P-442 (supplied by Allied Moulded Products).
Whether installing backboxes in new construction or “old work” installations, the installer should
test fit the keypad to the backbox before installing the backbox in a wall.
Note: Keypads may be wired to a homerun device, not to exceed 1000 feet with 16 AWG or 330
feet with 18 AWG.
SKL-4000 Mounting Installation
To recess- mount:
1. Mount SKL-4000 to wall studs using screw holes located on the side panels of the
enclosure.
2. Leave 3 inches minimum space between each SKL-4000 to accommodate the lids .
3. Install all SKL-4000s before connecting the power.
To surface mount:
1. Mount SKL-4000 to wall using screw holes located on the back panel of the enclosure.
2. Install all SKL-4000s before connecting the power.
Additional Documentation
Additional Documentation for the SKL-4000 is available at: SavantSystems.com
Products >
•
Savant Lighting Control
Savant Keypad Link
(SKL-4000)
Quick Reference Guide
009-0670-00
SKL-4000-00
101912
Copyright © 2012 Savant Systems, LLC. SAVANT and RacePoint Blueprint are trademarks of Savant Systems, LLC.
All brand names, product names and trademarks are the property of their respective owners.
Savant Systems, LLC reserves the right to change product specifications without notice.
-
1
-
2
Savant SKL-4000-00, the Keypad Link, effortlessly connects up to 40 Savant keypads to any Savant SmartLighting controller with available RS-422 ports. It ensures reliable communication between keypads and the controller, enabling seamless control of your Savant smart lighting system. Multiple SKL-4000 units can be linked together to accommodate larger systems, with a maximum of 256 keypads supported.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Savant SKL-1000-00 Reference guide
-
-
-
-
-
-
Savant PWM-PENC3-00 Deployment Guide
-
-
-
Savant WPB-BKLV02-00 Reference guide
Other documents
-
Gibraltar Building Products EW-1FG Operating instructions
-
LiteTouch 86 Quick start guide
-
Mircom LT-926 FA-301-DF Operating instructions
-
-
Siemens FB-300 Backboxes and Door User manual
-
Digital Monitoring Products 777 Installation guide
-
Optima Scale Floor User guide
-
-
CVS SKL 1200 C Series Operating Instructions Manual
-
Philips CRP765/01 Datasheet
