Gibraltar Building Products EW-1FG Operating instructions

5V CRIMPINSTALLATION GUIDELINES

END WALL FLASHING · EW-1

End Wall Flashing has very sharp edges. Use gloves to prevent

injury. This product is not recommended for direct contact

with treated lumber.

Working above grade is inherently dangerous, be sure that

proper fall protection measures are in place.

When working with power tools and sheet metal, gloves and

eye protection are absolutely required.

These basic installation guidelines are for use with typical or

standard applications. It is always recommended to seek advice

from a licensed professional, and to check with your local building

inspector or building permit oce for approvals and possible

variations that may apply.

EW -1

Outside Closure

#30 Felt min.

Decking

5V-Crimp Panel

CF-3*

Fastener

Tube Sealant

*Surface mounting requires use of Counter Flashing (CF-3)

#9 x 1-1/2" Screw

4 ⁄"

½"

4 ½"

Varies

EW-1CW Cotton White

EW-1FG Forest Green

EW-1 Endwall Flashing is used with: Gibraltar Corrugated, 5V

Crimp, SM-Rib, PBR Panel & R Panel.