Goodwe GM1000D User manual

GM1000D
Goodwe
Brand
Goodwe
Model
GM1000D
Type
User manual

Goodwe GM1000D is a smart meter designed for single-phase grid systems to monitor voltage, current, power, and energy consumption. It can be used with inverters, including SEMS systems, for energy management. The meter has a high precision and compact design, making it easy to install and operate. It features LEDs for power, energy consumption, and communication status, as well as a reset switch for troubleshooting. The GM1000D supports RS485 communication with a maximum cable length of 100 meters. It has a wide voltage range of 100V to 240V and a nominal current of 120A.

Goodwe GM1000D is a smart meter designed for single-phase grid systems to monitor voltage, current, power, and energy consumption. It can be used with inverters, including SEMS systems, for energy management. The meter has a high precision and compact design, making it easy to install and operate. It features LEDs for power, energy consumption, and communication status, as well as a reset switch for troubleshooting. The GM1000D supports RS485 communication with a maximum cable length of 100 meters. It has a wide voltage range of 100V to 240V and a nominal current of 120A.

01 INTRODUCTION
PACKING LIST
GoodWe Smart Meter is designed with high precision small
dimensions, convenient operation and installation.
It is available for both single-phase grid system connection to
dectect voltage, current, power and energy, for working with
inverters including SEMS systems for the purpose energy
management.
Any fault or damage caused misoperation or disobeyal against
the rules on manual is beyond GoodWe warrenty cover range.
1*Smart Meter
1*Screw Driver
2*CT(Current Transformer)
8*Cable Connection Terminal
1*RJ45-to-Pin Cable[1]
NOTE:
[1] Only suitable for RS485 cable connection on RJ45
port of GoodWe hybrid inverters.
2.1 SMART METER OVERVIEW
02 OVERVIEW
3.1 INSTALLATION ENVIROMENT
3.2 INSTALLATION (WITH DIN TRACK)
Protection Class: IP20(for indoor use)
Operating Temperature： -25℃~+60℃
① Pull to release the retaining clip
② Mount the HomeKit on the track
and push the
Retaining clip up(a click sound
indicates it is installed well)
①
②
① Power LED
② Energy consumption LED
③ Communications LED
④ Reset switch
⑤ USB Port
Reset
SMART METER
USB
1 B(485B-)
2 A(485A+)
5 -(CT2-)
6 +(CT2+)
7 -(CT1-)
8 +(CT1+)
9 N
10 L1
11 L2
12 L3
36mm
USB
Reset
03 INSTALLATION INSTRUCITON
2.2 CT OVERVIEW
32mm 35mm
16mm
45mm
2M
USB
Smart Meter
USER MANUAL
No. 90 Zijin Rd., New District, Suzhou, 215011, China
[email protected] | www.goodwe.com
Reset
SMART METER
USB
3.3 WIRING CONNECTION
340-00341-01
Correct direction of CT: House (K)→Grid(L).
Incorrect connection or direction will cause incorrect data.
04 ELECTRICAL DATA
GM1000D
Single-phase
110V/230V
100V ~ 240V
50Hz/60Hz
CT in:120A/40mA
0.48A ~ 120A
3W max
Active / Reactive Power Energy
Class 1
Class 1
Class 2
MODEL
APPLICATION
Voltage
Self-Consumption
Data Detection
Energy Calculation
Precision
Communication
(With inverter)
Weight
Altitude
Nominal Voltage
Voltage Range
Frequency
Nominal Current
Current Range
Voltage / Current / Active Power
/ Reactive Power / Power Factor
/ Frequency
RS485 (Bund Rate 9600 / ModBus
Protocol / communication cable
max. length 100m)
Voltage/ Current
Active Power
Reactive Power
5.2 RESET SWITCH
5.1 INDICATIONS
• Power LED：
Normal status: ON
• Energy Consumption LED:
Consuming: ON
Generating: Blinking
• Communication LED:
Transmitting data: ON
Resetting: Blink 5 times
5.3 USB PORT
For after-sales maintenance.
05 INTERFACE
Press
<3s
5s
＞10s
Function
Meter reset
Meter settings initialization
Meter initialize settings and clear energy data
AC coupled inverter
Grid-tie inverter
RS485
Grid
PV
House Meter
CT2
CT1
Load
House Grid
Current
Input
360g
＜2000m
FUSE 0.5A
  • Page 1 1
  • Page 2 2

Goodwe GM1000D User manual

GM1000D
Goodwe
Brand
Goodwe
Model
GM1000D
Type
User manual

Goodwe GM1000D is a smart meter designed for single-phase grid systems to monitor voltage, current, power, and energy consumption. It can be used with inverters, including SEMS systems, for energy management. The meter has a high precision and compact design, making it easy to install and operate. It features LEDs for power, energy consumption, and communication status, as well as a reset switch for troubleshooting. The GM1000D supports RS485 communication with a maximum cable length of 100 meters. It has a wide voltage range of 100V to 240V and a nominal current of 120A.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents