Goodwe GM3000 User manual

Brand: Goodwe

Model: GM3000

Type: User manual

Goodwe GM3000 is a three-phase smart meter designed for high precision energy management in both residential and commercial applications. With its ability to detect voltage, current, power, and energy, it offers comprehensive monitoring of your energy consumption and generation. The meter's compatibility with GoodWe hybrid inverters and SEMS systems allows for seamless integration into existing solar setups. Additionally, the USB port enables after-sales maintenance and data analysis, ensuring optimal performance and longevity of your system.

PACKING LIST

USER MANUAL

Smart Meter

Kun Lun Shan Road 189, Suzhou, Jiangsu, China 215000

[email protected] | www.goodwe.com

1* Smart Meter

1* Screw Driver

1* USB Seal

1* CT (Current Transformer)[1]

4* Cable Connection Terminals

1* RJ45-to-Pin Cable[2]

NOTE:

[1] A three-phase Meter will contain 3 CT clamps.

Specifications are subject to the physical product.

[2] Only suitable for RS485 cable connection on RJ45 port of

GoodWe hybrid inverters.

OVERVIEW02

2.1 SMART METER OVERVIEW

66.5mm

85mm

①

②

③

④

⑤

36mm

9 N

10 L1(A)

11 L2(B)

12 L3(C)

3 -(IC-)

4 +(IC+)

8 +(IA+)

7 -(IA-)

5 -(IB-)

6 +(IB+)

2 A(485A+)

1 B(485B-)

Power LED

Energy Consumption LED

Communications LED

Reset Switch

USB Port

2.2 CT OVERVIEW

2M 32mm

45mm

35mm

16mm

INSTALLATION INSTRUCTION03

3.1 INSTALLATION ENVIRONMENT

Protection Class: IP20 (for indoor use)

Operating Temperature: -20~60

3.2 INSTALLATION with DIN track

Pull to release the retaining clip

Mount the Meter on the

track and push the retaining

clip up (a click sound indicates

it is installed well) ①

②

02 03

Any fault or damage caused by misoperation or disobeyal

against the rules on manual is beyond GoodWe warrenty

cover range.

GoodWe Smart Meter is designed with high precision

small dimensions, convenient operation and installation.

It is available for both single-phase and three-phase grid

system connection to detect voltage, current, power

and energy, for working with inverters including SEMS

systems for the purpose energy management.

Load

Inverter

RS485

N L1 L2 L3

Main Meter

Grid

CT×3

RS485

Grid

Inverter

N L1

Main Meter

Grid

Load

Smart Meter

FUSES 0.5A

3.3 WIRING CONNECTION

3.3.1 WIRING FOR SINGLE-PHASE METER

• Correct direction of CT: House (K)Grid (L).

Incorrect connection or direction will cause incorrect data.

3.3.2 WIRING FOR THREE-PHASE METER

Smart Meter

FUSES 0.5A

ELECTRICAL DATA04

APPLICATION Three-phaseSingle-phase

Active/Reactive Power Energy

Voltage

MODEL GM3000GM1000

Voltage/Current/Active Power/

Reactive Power/Power Factor/Frequency

Nominal Voltage

Voltage Range

Frequency

Nominal Current

Current Range

Current

Input

Self-Consumption

Data Detection

Energy Calculation

Precision

Voltage/Current

Active Power

Reactive Power

With InverterComm.

Class 1

Class 2

RS485 (Bund Rate 9600 / ModBus Protocol /

communication cable max. length 100m)

3W max

0.48A~120A

CT in:120A/40mA

50Hz/60Hz

0.7~1.2Un 0.7~1.2Un

3L+N/400Vac230Vac

INTERFACE05

5.1 INDICATORS

* Power LED :

Normal operation: ON

* Energy Consumption LED:

Consuming: On

Generating: Blinking

* Communication LED:

Transmitting data: Blinking

Resetting: Blink 5 times

5.2 RESET BUTTON

Press Function

3s Meter Reset

5s Meter Settings Initialization

10s Meter Initialize settings and clear energy data

5.3 USB PORT

For after-sales maintenance

340-00133-01

04 05

06 07

• Correct direction of CT: House (K)Grid (L).

• Ensure CT and corresponding supply cable are connected to

the same phase.

Incorrect connection or direction will cause incorrect data and

may damage the meter.

Goodwe GM3000 User manual

Goodwe GM3000 User manual

Related papers

Other documents