JADEMAR JFL-HAZ Series User manual

Type
User manual

JADEMAR JFL-HAZ Series Hazardous Location Floodlight is certified for the most challenging locations with Class I Division 2 Group A, B, C, and D Classifications, providing reliable illumination in potentially explosive environments. Its sturdy construction and surge protection ensure durability and safety, while its multiple mounting options and adjustable beam angle offer versatility in installation and application.

JADEMAR JFL-HAZ Series Hazardous Location Floodlight is certified for the most challenging locations with Class I Division 2 Group A, B, C, and D Classifications, providing reliable illumination in potentially explosive environments. Its sturdy construction and surge protection ensure durability and safety, while its multiple mounting options and adjustable beam angle offer versatility in installation and application.

Class I: A hazardous locaon in which flammable gases or vapors may be
present in the air insufficient quanes to be explosive or ignitable.
Division 2: Abnormal condions, where ignitable concentraons of
flammable gases, vapors or liquids are not likely to exist under normal
operang condions.
Groups A - D: The gases and vapors of Class 1 locaons are broken into
four groups by the Code: A, B, C, and D. These materials are grouped
according to the ignion temperature of the substance, its explosion
pressure, and other flammable characteriscs.
ŸGroup A: The only substance in group A is acetylene because it is a gas
with extremely high explosion pressures.
ŸGroup B: This group includes hydrogen and other materials with
similar characteriscs.
ŸGroup C & D: The most usual Class 1 groups. They comprise the
greatest percentage of all Class I hazardous locaons.
ŸGroup C: Found in Group D are many of the most common flammable
substances such as butane, gasoline, natural gas and propane.
ATEX Zone 1: A Zone 1 area is classified as a place in which an explosive
atmosphere, consisng of a mixture with air or flammable substances in
the form of gas, vapor or mist is likely to occur in normal operaon
occasionally.
ATEX Zone 2: The definion of Zone 2 is a hazardous area classified as an
atmosphere where a mixture of air and flammable substances in the form
of gas, vapor or mist is not likely to occur in normal operaon, but if it
does occur, will persist for a short period only.
The Jademar JFL-HAZ series of Hazardous Locaon Floodlights are cerfied
for use in the most challenging of locaons with Class I Division 2 Group A,
B, C, and D Classificaons.
Input Power:
30W / 100W / 180W
Efficacy:
up to 115 lm/W
CCT:
2700K / 4000K / 5700K
Input Voltage:
100-277VAC
Surge Protecon:
IEC/EN 61000-4-5
Cerficaons &
Compliance
Class I Division 2 Group A, B, C,D
UL / ISO 14001 / ISO 9001
Warranty:
10 Years
APPLICATIONS
ŸPetroleum Refineries
ŸAircra Hangers
ŸDry Cleaning Plants
ŸUlity Gas Plants
ŸGas & Diesel Staons
EXPLOSION PROOF WIRE GUARD OPTION
U-BRACKET MOUNT ADJUSTABLE WALL MOUNT EYE-HOOK MOUNT
PERFORMANCE SUMMARY
MOUNTING OPTIONS
CERTIFICATIONS AND COMPLIANCE
UL844 9001:2019
Page 1 of 3
Informaon contained herein is subject to change without noce.
Values are nominal.
Revised 08/2022
WWW.JADEMAR.COM
Miami, FL USA - info@jademar.com
T: 305.640.0465 - F: 305.640.0468
PRODUCT DESCRIPTION
HAZARDOUS LOCATION CLASSIFICATIONS
LUMEN PERFORMANCE AND ELECTRICAL DATA
JFL-HAZ-30W
JFL-HAZ-100W
JFL-HAZ-185W
AWB
Eye-Hook and U-Bracket
Mount Standard
ORDERING INFORMATION / EXAMPLE: JFL-HAZ-30W-30K-YW-AWB
JFL-HAZ HAZARDOUS LOCATION FLOODLIGHT (CLASS I DIVISION 2 GROUP A, B, C, D)
SPECIFICATION SUBMITTAL DETAIL
Project Name/Type: Date:
Catalog/Part #:
Page 2 of 3
Informaon contained herein is subject to change without noce.
Values are nominal.
Revised 08/2022
WWW.JADEMAR.COM
Miami, FL USA - info@jademar.com
T: 305.640.0465 - F: 305.640.0468
FIELD INSTALLED OPTIONS
JFL-HAZ-REC-100W Recessed Frame for 100W
JFL-HAZ-REC-185W Recessed Frame for 185W
Product Series Wattage Input Voltage CCT Light Distribution Finish Mounting Options Power Cord Options
JFL-HAZ
30W
100W
185W
Blank
(100-277VAC)
H
(480VAC Driver)
30K (3000K)
40K (4000K)
50K (5000K)
Blank
(12 Beam Angle)
YW (Yellow)
GR (Gray)
Product Number JFL-HAZ-30W JFL-HAZ-100W JFL-HAZ-185W
Maximum Dimensions 7.87" x 7.87 x 10.63" 11.81" x 11.81" x 6.89" 15.75" x 15.75" x 7.29"
Nominal watts 30W 100W 185W
Average Nominal Efficacy (lm/W) 115 115 115
Average Lumen Output (lm) 3,450 11,500 20,700
Max Weight 8.9 lbs. 16.6 l bs. 26.5 l bs.
Input Voltage
CCT
CRI
THD @ 120VAC
Power Factor
Surge Protection
Construction
Rated Lifetime
Ambient Working Temp
Certifications & Compliance
Limited Warranty
100-277VAC
>73
<10%
>0.98
IEC/EN 61000-4-5
10 Yrs
Die Cast Aluminum / Tempered Glass Lens
2700K / 4000K / 5700K
Rated Life of 100,000+ Hrs
(-30 ºC to +50 ºC) -22°F to 122°F
CLASS I DIVISION 2 GROUP A, B, C, D / UL844
ISO 14001 / ISO 9001/ UL 1598 & ANSI/UL 8750
MOUNTING INSTALLATION OPTIONS
CEILING MOUNT WALL MOUNT
U-BRACKET MOUNT
DROP MOUNT
POLE MOUNT
8.2FT - 9.8FT
7.88”
5.90”
7.88”
5.90”
4 (Ø 0.79”)
Page 3 of 3
Informaon contained herein is subject to change without noce.
Values are nominal.
Revised 08/2022
WWW.JADEMAR.COM
Miami, FL USA - info@jademar.com
T: 305.640.0465 - F: 305.640.0468
JFL-HAZ SERIES
HAZARDOUS LOCATION FLOODLIGHT
(CLASS I DIVISION 2 GROUP A, B, C, D)
  • Page 1 1
  • Page 2 2
  • Page 3 3

JADEMAR JFL-HAZ Series User manual

Type
User manual

JADEMAR JFL-HAZ Series Hazardous Location Floodlight is certified for the most challenging locations with Class I Division 2 Group A, B, C, and D Classifications, providing reliable illumination in potentially explosive environments. Its sturdy construction and surge protection ensure durability and safety, while its multiple mounting options and adjustable beam angle offer versatility in installation and application.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI