CODELOCKS CL610 & CL615 Marine Gate Box Kit Installation guide

Type
Installation guide

This manual is also suitable for

QUICK
CODE
ACCESS
Heavy duty locks with on the door code
change capabilities. Simple and quick
control of coded access.
Traditionally, changing the code on a mechanical lock requires the
lock to be removed from the door; the CL600 however, features
QuickCode functionality allowing on the door code changes in
seconds. The CL600 QuickCode brings signicant advantages to
commercial users such as hospitals, schools and local authorities.
The locks allow for various ways of managing entry by code, key or
passage function entry via full size lever handles.
Full size lever handles with return to door
Suitable for wooden doors between 1
3
/
8
- 2
3
/
8
thick
Passage function option
Suitable for interior and exterior use
Tubular latch and mortise lock models available
Large three coil lever return spring suitable for high trac use
Available in brushed steel, polished brass and at black nishes
Tested to Grade 2 ANSI A156.2
UL/ULC Fire Rating 3 hours
Easy to
install
8,191
Total code
combinations
L
I
F
E
T
I
M
E
L
I
M
I
T
E
D
GUARANTEE
Limited lifetime
warranty
*
On the door
code changes
FEATURES
www.codelocks.com
Scan to
shop!
Passage Function
The CL615 model provides
a passage function. The
outside lever will retract the
latch freely until disabled.
PRODUCT DIMENSIONS
TECHNICAL SPECIFICATIONS
LOCK MODELS
FEATURE DESCRIPTION
Spindle Type Two part
5
/
16
” (8mm) spring loaded spindle
Tubular Latch Medium duty deadlocking latch
Mortise Lock Grade 1 ANSI American Mortise Latchbolt
Material Zinc Alloy
Finish Color Brushed Steel, Polished Brass and Flat Black
Non Handed Locks will t doors hung on the left or right
Door Thickness 1
3
/
8
” - 2
3
/
8
” (35mm - 60mm)
Key Bypass As standard
Keyed Alike Locks can be supplied keyed alike on request
Key Cylinder Change As standard
Code Storage Single Code
Install Options Vertical only
Suitable For Interior and exterior use
Standards Tested to Grade 2 ANSI A156.2
UL/ULC Fire Rating 3 hours
CL420
CL650 Mortise Lock
Grade 1 ANSI American Mortise
Latchbolt.
Back to Back Option (BB)
Medium duty tubular latch.
Two coded plates for
installation on both sides of
the door. Provides coded
access in both directions.
CL610 / CL615 BB
Panic Access Kit
Front plate only. Install with new
or existing panic equipment. The
follower on the panic equipment
must return to square to align
with follower on the lock.
CL190CL600PK
Two Tubular Latch
Sizes Available:
Code Change Method
QuickCode allows on the door
code changes in seconds!
ADDITIONAL FEATURES
CL610 CL615 CL650
Panic Kit Option
An extra long spindle is
provided to work with
most single point panic
pads or bars.
25mm
(1”)
57mm (2
1
/
4
”)
50mm (2”)
60mm (2
3
/
8
”)
70mm (2
3
/
4
”)
25mm
(1”)
57mm (2
1
/
4
”)
50mm (2”) 60mm (2
3
/
8
”)
70mm (2
3
/
4
”)
Standard Supply
Requires 1” x 3
1
/
4
(25mm x 82mm) hole
Requires 1” x 3
5
/
8
(25mm x 92mm) hole
IC Cylinder
Prepped to receive a Small
Format Interchangeable Core.
Please note we do not supply
core or keys.
*Codelocks mechanical locks oer a limited lifetime warranty and will be repaired, service or replaced free of charge if they develop a manufacturing fault. Faults caused by misuse, abuse and/or poor tting are not covered under warranty.
All our door locks (excluding the CL50, CL160, CL200 and CL2000 which comes with dual backset) come with 2
3
/
4
” standard backset. 2
3
/
8
” backset can be substituted upon request at no additional charge. © 2019 Codelocks Ltd. All rights reserved.
Other Models
Available:
Tubular Latch
Medium duty deadlocking
latch. Latch retracts by turning
inside handle freely, or the
outside handle after code
input.
CL190CL610 / CL615
  • Page 1 1
  • Page 2 2

CODELOCKS CL610 & CL615 Marine Gate Box Kit Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI