Holdrite HF-PC-0150 Installation guide

Type
Installation guide

This manual is also suitable for

Solutions to
Shape the World
Installation Instructions
HoldRite
®
HydroFlame
Pipe Collar
WALL INSTALLATION
1
4
Clean plastic pipe.
Close collars and slide along the
pipe until ush with wall. Anchors as
required.
2
Apply caulking as required to close
remaining gap to both sides of wall
assembly; providing a re smoke and
gas resistant seal. Spread caulking
smoothly and evenly all around.
3
Install collars around pipe.
Solutions to
Shape the World
Installation Instructions
HoldRite
®
HydroFlame
Pipe Collar
FLOOR INSTALLATION
1
4
Clean plastic pipe.
Close collar and slide along the pipe
until ush with bottom of oor.
Anchors as required.
2
Apply caulking as required to close
remaining gap to the bottom side
of oor assembly; providing a re
smoke and gas resistant seal. Spread
caulking smoothly and evenly all
around.
3
Install collar around pipe from the
bottom of oor.
  • Page 1 1
  • Page 2 2

Holdrite HF-PC-0150 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI