2. AMG
  3. AMG2123

AMG AMG2123 Instruction Sheet

  • Hello, I have reviewed the Instruction Sheet for the AMG2123 Rackmount Three Channel Video Only Fibre Optic Transmitter. This document details the device's video and optical connection specifications, including its 75 ohm BNC connectors, ST style optical interface, and 850nm wavelength. I'm ready to answer your questions about this device.
  • What type of video connectors does the device use?
    What is the input impedance?
    What type of optical connectors are used?
    What is the typical launch power for 50/125 fiber?
    What is the nominal wavelength?
    What are the dimensions of the unit?
    What does the green indicator light mean?
AMG Systems Ltd. reserves the right to make changes to this document without notice.
The information herein is believed to be accurate. No responsibility however is assumed
by AMG for its use.
Page 1 of 1 D03570-01
AMG2123
Instruction Sheet
AMG2123 Rackmount Three Channel Video Only Fibre Optic Transmitter
Video Connection
Connectors ...........................75 ohm BNC Socket.
Input Impedance...................75 ohm terminated.
Input Level ...........................1 volt p-p nominal.
Frequency Response.............10Hz to 10MHz min.
Optical Connection
Connectors............................ST Style
Launch Power
50/125............................-20dBm min. -17dBm typ.
62.5/125.........................-17dBm min. -14dBm typ.
Wavelength...........................850nm nominal.
Dimensions
Height ...................................3U
Width....................................7HP
Depth ....................................205mm
Mounting Details
The AMG2123 plugs into and is powered from the AMG2000 Subrack
Indicators
Power....................................Green – lit when unit powered
POWER
2123
/