AMG AMG2321F Instruction Sheet

I'm a chat assistant, and I've reviewed the Instruction Sheet for the AMG2321F Mini Video Only Fibre Optic Transmitter. This document provides detailed specifications for the device including video and optical connections, power requirements, and dimensions. I'm ready to answer your questions about this product and how to use it.
What is the input impedance of the video connection?

What type of connector is used for the optical connection?

What is the nominal wavelength?

What is the supply voltage range?

What is the length of the device

AMG Systems Ltd. reserves the right to make changes to this document without notice.

The information herein is believed to be accurate. No responsibility however is assumed

by AMG for its use.

Page 1 of 1 D035125-02

AMG2321F

Instruction Sheet

AMG2321F Mini Video Only Fibre Optic Transmitter

The AMG2321F is a miniature transmitter designed to transmit

video signals over multimode optical fibre.

Video Connection

Connector ............................75 ohm BNC Socket

Input Impedance...................75 ohm terminated

Input Level ...........................1 volt p-p nominal

Frequency Response.............10Hz to 10MHz min.

Optical Connection

Connector .............................ST Style

Launch Power

50/125 Fibre ..................-20dBm min. -17dBm typ.

62.5/125 Fibre ...............-17dBm min. -14dBm typ.

Wavelength...........................850nm nominal

Power Connection

Supply...................................+12 volts d.c. to +16 volts d.c. @ 35mA

Connection ...........................Two core flying lead.

Polarity .................................+VE Marked.

Dimensions

Length...................................60mm

Diameter ............................... 22mm.

Mounting Details

The 2321F is designed to connect directly to the end of a coaxial drop cable.

Always allow for bend radius of optical and electrical cables when mounting.

There is no adjustment required when using this product.

+VE MARKED