2. Wren Kitchens
  3. Frontal Hinge Replacement

Wren Kitchens Frontal Hinge Replacement Assembly Guide

  • Hello! I am an AI chatbot trained to assist you with the Wren Kitchens Frontal Hinge Replacement Assembly Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For Internal Use:FI.WR.INS.077_WKIN0067_HingedDoor_ReplaceFRTL_HINGE_Rev3.indd
FRONTALS
Door with Hinge
Replacement Frontal
Attachment Guide
Hinge Cover Caps
Step 5.
Adjust hinge to suit. As shown below.
For frontals with cabinet mechanisms,
see specic mechanism instructions for
frontal attachment guidelines.
Hinge Plates
Hinge dowels
Step 1.
Discard existing hinge
dowels and replace with
new ones provided.
View from Inside of Carcase
To adjust hinge using a screw
driver, tighten or loosen as
required at points 1 & 2.
Point 1 - In - Out
Point 2 - Left - Right
1
2
FRONTAL
HINGE
ADJUSTMENT
To Release door
Pull catch as shown,
to release hinge
from the hinge
plate.
Step 6.
Fit cover caps to hinge.
Adjust Softclose to suit.
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
Step 3.
Secure hinges with the
2 x original screws.
Step 4.
Attach the door to unit,
clip hinge onto hinge plate and click to
secure.
Step 2.
Insert hinge into hinge holes
provided, in accordance with
customers plan.
To Move the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
A
B
- Innity +
For Internal Use:FI.WR.INS.077_WKIN0067_HingedDoor_ReplaceFRTL_HINGE_Rev3.indd
FRONTALS
Door with Hinge
Replacement Frontal
Attachment Guide
Step 5.
Adjust hinge to suit. As shown below.
For frontals with cabinet mechanisms,
see specic mechanism instructions for
frontal attachment guidelines.
Hinge dowels
Step 3.
Secure hinges with the
2 x original screws.
Step 1.
Discard existing hinge
dowels and replace with
new ones provided.
View from Inside of Carcase
To adjust hinge using a screw
driver, tighten or loosen as
required at points 1 & 2.
Point 1 - In - Out
Point 2 - Left - Right
12
FRONTAL
HINGE
ADJUSTMENT
To Release door
Pull catch as shown,
to release hinge
from the hinge
plate.
Hinge Cover Caps
Step 6.
Fit cover caps to hinge.
Adjust Softclose to suit.
Hinge Plates
Step 4.
Attach the door to unit,
clip hinge onto hinge plate and click to
secure.
Step 2.
Insert hinge into hinge holes
provided, in accordance with
customers plan.
To Move the
hinge up/down,
loosen screws
A + B,
Manoeuvre
the door, then
re-tighten the
screws
A
B
- Innity
The top and bottom
hinges MUST be
adjusted to the SAME
STRENGTH.
/